ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

CSI CSiCol v11.0.0 build 1104 Software
 

CSI CSiCol v11.0.0 build 1104

CSiCol is a comprehensive software package used for the analysis and design of columns, efficiently addressing the design of columns of any concrete, reinforced concrete, or composite cross-section. CSiCol provides a 'Quick Design Wizard' tool that will guide you step-by-step through the entire process of column design.

 
    Читать статью дальше  (комментариев - 20)


MECA MecaWind v2406 Software
 
MECA MecaWind v2406

MECA MecaWind v2406

MecaWind is a wind load calculator software used to calculate wind loads and/or wind pressures on the main wind force resisting system (MWFRS) of buildings and many other structures (Chimneys, Tanks, Towers, Open Signs, Closed Signs, Solar Panels, Rooftop Equipment, Canopy, Bins, Tanks, Silos and Free Standing Walls).  It is based upon the ASCE 7 standard used throughout the United States for design loads, which is published by the American Society of Civil Engineers.  The MecaWind wind load calculator software contains multiple versions of the ASCE 7 standard as well as the Florida Building Code (FBC).  For instance, it includes, ASCE 7-05, ASCE 7-10 and ASCE 7-16, each being a different release of the same standard.  The latest version is ASCE 7-16, and many of the changes found from the ASCE 7-10 version to ASCE 7-16 can be found in this article.  ASCE 7-05 is also included in MecaWind, but this older version of the standard is used less frequently in jurisdictions. However, having it included allows users to evaluate existing structures to the older version of the ASCE 7 standard. MecaWind software is very cost effective, easy to use, and has a minimal learning curve.  The software allows you to perform wind design with ease and is essentially a wind pressure calculator. 


MecaWind calculates wind loads per the ASCE 7 standard, and in that standard there are two basic classifications of structures: Buildings & Other Structures.

A building is just as you would expect, it could be a simple house or storage building or a high rise building. There are many different special classifications of buildings within the ASCE 7 standard, and all of these are covered by the MecaWind wind load calculator software. Below is a list of examples:
  • Enclosed Building
  • Partially Enclosed Building
  • Partially Open Building
  • Open Building
  • Low Rise Building
  • Simple Diaphragm Building
  • High Rise Building
  • L-Shaped Building
There are several different roof types which are addressed in the ASCE 7 standard, and these same roof types are also included as options with the MecaWind wind load calculator software.  Depending upon the specific analysis methods chosen, some of these roofs are not handled by ASCE 7. However, the MecaWind wind load calculator software makes it easy for the user to easily see which roofs are permissible based upon the method that has been selected by the user.

Here are some of the more commonly used roof types: Arched, Domed, Flat, Stepped, Gabled, Multi-span Gabled, Hipped, Mansard, Monoslope and Sawtooth.
    Читать статью дальше  (комментариев - 17)


MECA MecaLug v1039 Software
 
MECA MecaLug v1039

MECA MecaLug v1039

MecaLug is a Padeye or Lifting Lug Calculation Software package that is used to perform padeye or lifting lug calculations as well as analyze loads acting on padeyes or lifting lugs for a structure or piece of equipment. Several different styles of padeyes or lifting lugs are offered giving the user multiple options in selecting an appropriate lifting lug. There are also several different configurations in the MecLug Software for different equipment and structures. The lifting lug software even has templates for lifting a stack or cylindrical vessel from horizontal to vertical, using either lifting lugs or lifting trunnions. For this special type of lifting of stacks, the lifting lug software considers the multiple angles as the structure rotates from horizontal to vertical in order to find the worst angle on the lifting lugs/trunnions and tailing lug.


MecaLug Standard version is the least expensive version of the software that allows the user to perform Padeye / lifting lug calculations per ASME BTM-1 "Design of Below-the-Hook Lifting Devices”. Engineers often design structures and equipment for extreme wind, seismic and other loading that may never occur; however, in the case of a lifting lug those extreme loads may very well be experienced at the beginning of the equipment life cycle, not in 20+ years down the road. The failure of a lifting lug could very likely put human life in danger in the event of a failure. The lifting lug software allows the user to quickly and accurately analyze Padeye / lifting lugs for a variety of loads.

MecaLug Pro version offers the same features of the standard version of the lifting lug software of analyzing a single lug or trunnion, but MecaLug Pro also has the added benefit of being able to apply those lugs to a lifting system and analyze what loads would be seen by the crane, cable, and lugs. This Pro feature of the MecaLug allows the designer to consider lifting a piece of equipment or structure, and have the software determine the loads acting on each individual lug. The analysis of each lug is then performed by the lifting lug software. The Pro features make MecaLug an all-in-one lifting lug software.
    Читать статью дальше  (комментариев - 10)


MECA MecaStack v5630 Software
 
MECA MecaStack v5630

MECA MecaStack v5630

MecaStack is steel stack design software that is used to design steel stacks, steel chimneys, flares, exhaust stacks, etc. of a variety of dimensions and attachments. In addition, the software also performs a bending analysis of the stack to aid with the stack lifting design. MecaStack can be used to analyze self supported stacks (free standing) and guyed stacks. Similarly, it can be used for design of steel chimneys or stacks that are braced on a building or other structures by lateral bracing. Above all, the software is very easy to use and extremely versatile at handling a wide range of problems and designs.


Some of the components that MecaStack incorporates are: Ladders and Platforms; Stiffening Rings; Structural Flanges; Damping devices; Flare Tips; Insulation/Refractory/Jacket; Breaches/Nozzles; Piping.

The user has complete control over the design codes that are used for Along Wind, Across Wind, Stress and Fatigue. In addition, the load combinations and factors can be customized as needed or auto-populated per the design code selected.  There are several comprehensive steel chimney design codes available within the MecaStack design software:
  • American Standard: ASME STS-1
  • CICIND
  • Indian Standard
  • British Standard
  • Euro Standard
  • Canadian Standard
  • Brazilian Standard (NBR 6123)
  • ISO 13705 (Formerly API-560)
  • Mexican Standard CFE
Seismic Design Codes. There are several seismic design codes available:
  • Indian (IS1893)
  • UBC 97
  • Manual Entry
  • International Building Code (IBC)
  • Response Spectrum Analysis
  • National Building Code of Canada (NBCC)
  • EuroNorm (EN 1998-6)
    Читать статью дальше  (комментариев - 8)


Leica Infinity v4.0.2 ENG+RUS Software
 
Leica Infinity v4.0.2 ENG+RUS

Leica Infinity v4.0.2 ENG+RUS

Leica Infinity - интуитивно понятное офисное программное обеспечение от компании Leica Geosystems - пришло на смену Leica Geo Office. Геодезическая съемка сегодня предполагает наличие возможности гибко и быстро обрабатывать полевые данные и информацию их офиса в любом месте и передавать их. Сегодня более, чем когда-либо прежде, существует потребность в едином Рабочем процессе для всех проектов. Для реализации этой потребности и было разработано Leica Infinity : дружественная, интеллектуальная программная платформа  с интеллектуальной информационной архитектурой, которая открывает безграничные возможности по организации рабочего процесса. В результате получаем повышение эффективности, прозрачности и просто улучшения всего процесса съемки.


Опционально программа имеет следующие модули и возможности:
  • Обработка данных тахеометрии.
  • Обработка нивелирования с возможностью уравнивания по высоте.
  • 3D уравнивание.
  • Работа с поверхностями.
  • Работа с результатами сканирования.
  • Обработка одночастотных и многочастотных GNSS.
Leica Infinity осуществит для Вашего проекта комплексную обработку различных видов данных: TPS, GNSS , изображения, сканирование. Многочисленные форматы данных можно легко редактировать, архивировать и экспортировать в CAD-приложения(системы проектирования) без потери целостности и «борьбы» с трудностями, часто встречающимися при преобразованиях. Это относится не только к данным от различных типов инструментов, но и данных, полученных с разных сайтов и от изыскательских команд.
    Читать статью дальше  (комментариев - 14)


Graitec Advance Workshop DSTViewer 2023.1 Software
 
Graitec Advance Workshop DSTViewer 2023.1

Graitec Advance Workshop DSTViewer 2023.1

Import, sort and manage multiple industry standard digital production formats including: CAM, PCS, DXF, CSV, XLS, BOM, DTSV, NC, NC1.

    Читать статью дальше  (комментариев - 5)


С Рождеством! ---
 
Вроде, не Пасха нынче, но почему-то именно сегодня так хочется сказать, Господи, прости нас!!!

С Рождеством!

 


    Читать статью дальше  (комментариев - 9)


Bentley RAM 2022.12 Software
 
Bentley RAM 2022.12
Bentley RAM Concept CONNECT Edition Update 4 08.04.00.122
Bentley RAM Connection Standalone CONNECT Edition Update 9 13.09.00.163
Bentley RAM Elements CONNECT Edition Update 8 16.08.00.167
Bentley RAM Structural System CONNECT Edition Update 4 17.04.02.12

Bentley RAM 2022.12

Легко реализовывайте высококачественные и экономичные проекты с использованием различных бетонных, стальных и балочных строительных конструкций. Проектируйте, анализируйте и создавайте документацию по вашим проектам зданий для экономии времени и средств. Максимально повысьте рентабельность ваших инвестиций в ПО благодаря полностью интегрированному набору приложений для комплексного анализа, проектирования и оформления документации для стальных и бетонных конструкций. Повышение вашей производительности за счет устранения утомительных и трудоемких задач с помощью практических приложений RAM. Любые виды проектирования: от отдельных компонентов до крупномасштабного строительства и фундаментов.


RAM Structural System
Надежное оснащение и быстрая разработка высококачественных и экономичных проектов с использованием различных бетонных, стальных и балочных строительных конструкций.

RAM Connection
Анализ, проектирование и мгновенная проверка всех типов соединений с комплексными расчетами и соблюдением сейсмических требований.

RAM Elements
Выполнение анализа и проектирование – включая 3D конечно-элементный анализ – практически любого типа строительной конструкции и структурных компонентов в едином доступном приложении.

RAM Concept
Экономичное проектирование панелей, опорных плит и фундаментов с исключительно наглядным визуальным контролем соответствия нормам, эффективности и практичности конструкций.
    Читать статью дальше  (комментариев - 21)


Graitec Tricalc 2023.1 Software
 
Graitec (ex. Arktec) Tricalc 2023.1 build 2022.11.28
incl. Advance CAD 2023 build 2022.03.03

Graitec Tricalc 2023.1

Tricalc es un software completo e integrado para el proyecto de estructuras, desde el modelo estructural hasta el dimensionamiento, detalle y fabricación final de las estructuras. En cada una de las fases del proyecto, Tricalc presenta funcionalidades que son muy valiosas para los proyectistas de estructuras.


Eficacia y seguridad son fundamentales para el éxito de los proyectos. La capacidad de modelización y de análisis de Tricalc, lo sitúan como la solución idónea para garantizar una modelización eficaz y un análisis con seguridad, permitiendo dedicar más tiempo al diseño y concepción del proyecto y menos a los procesos de trabajo.

Las nuevas arquitecturas, los nuevos edificios en altura, las nuevas tipologías constructivas y el trabajo dentro de la globalización, exigen de nuevas capacidades: la capacidad de poder modelizar los nuevos edificios con versatilidad, la capacidad de incluir nuestros proyectos en las nuevas tipologías constructivas y la capacidad de trabajar en ambiente colaborativo BIM.

El dimensionamiento y el detalle de las armaduras de todos los elementos estructurales de hormigón, con el cumplimiento automático de las exigencias de las normativas y aspectos constructivos, proporciona al proyectista de estructuras una solución altamente productiva y segura.

Tricalc mantiene desde su creación una filosofía BIM, consistente en un único modelo tridimensional con toda la información asociada y vinculada, para el proyecto de estructuras. Este modelo es hoy posible de ser exportado e importado a través de formato BIM/IFC 4.0, para el trabajo colaborativo, y para la entrega a los clientes finales.

Los usuarios de Tricalc acostumbran a decir "tanto más importante como el software es el soporte técnico que hay por detrás del mismo”. Es el soporte técnico, siempre presente, el que permite tener una garantía adicional sobre la seguridad de los proyectos que desarrollemos. Es el soporte técnico, siempre presente y prestado por el propio fabricante del software, el que nos da una garantía única de calidad.
    Читать статью дальше  (комментариев - 30)


Schlumberger OLGA 2022.1 Software
 
Schlumberger OLGA 2022.1.0.35696 x64

Schlumberger OLGA 2022.1

Программный комплекс OLGA разработан для моделирования установившихся и переходных многофазных потоков в скважинах и трубопроводах. OLGA может работать с любым сочетанием многокомпонентных углеводородов и пластовой воды, а также с однофазным потоком. Точнее, программный комплекс OLGA используется для эффективного и точного моделирования, анализа и оптимизации значительного набора операций по транспортировке скважинной продукции и связанных с ней явлений, то есть применим для широкого ряда операций системы.


Successful production system design and operations requires a detailed understanding of multiphase flow behavior. Flow modeling and simulation provides valuable insights into flow behavior, including the physics describing flow through the entire production systems, from reservoir pore to process facility. The OLGA dynamic multiphase flow simulator models time-dependent behaviors, or transient flow, to maximize production potential. Transient modeling is an essential component for feasibility studies and field development design. Dynamic simulation is essential in deepwater and is used extensively in both offshore and onshore developments to investigate transient behavior in pipelines and wellbores. Transient simulation with the OLGA simulator provides an added dimension to steady-state analyses by predicting system dynamics such as time-varying changes in flow rates, fluid compositions, temperature, solids deposition and operational changes. From wellbore dynamics for any well completion to pipeline systems with all types of process equipment, the OLGA simulator provides an accurate prediction of key operational conditions involving transient flow.
    Читать статью дальше  (комментариев - 12)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Январь 2023    »
ПнВтСрЧтПтСбВс
 1
2345678
9101112131415
16171819202122
23242526272829
3031 
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023