|
|
Автор: Williams
Дата: 14 октября 2023
Просмотров: 636 |
|
Applied Flow Technology Arrow 2023 v10.0.1100
Applied Flow Technology Arrow - отличная программа для гидравлического расчета различных разветвленных сетей со сжимаемыми средами (включает также расчет теплопотерь). Осуществляет анализ системы при скоростях вплоть до звуковой (также включен анализ сети при звуковом ударе).
AFT Arrow is a fluid dynamic simulation tool used to calculate pressure drop and flow distribution in gas piping and ducting systems.
- Accurately simulate individual components and their interaction including effects of heat transfer, real gases and choked flow.
- Tightly integrate equipment characteristics, analysis and output with your system’s schematic representation.
- Utilize a wide array of features without sacrificing your need for a short learning curve.
- Compare the performance of new designs and assure all design requirements are met.
- Identify and correct operational problems in installed systems.
- Significantly improve the quality of systems engineering and produces less costly, more efficient and more reliable piping systems.
Video tutorials |
|
Читать статью дальше (комментариев - 6)
| |
|
|
Автор: Williams
Дата: 25 сентября 2023
Просмотров: 702 |
|
Applied Flow Technology Fathom 2023 v13.0.1100
Applied Flow Technology Fathom - программно-аналитический комплекс моделирования потока в трубопроводе. Удобный графический интерфейс, встроенная библиотека оборудования, арматуры и флюидов, широкие аналитические возможности, схематическое изображение создаваемого объекта, все это реализовано в AFT Fathom и предоставляет инженеру проектировщику возможность системного подхода в реализации проектов любой сложности. AFT Fathom обладает большим спектром возможностей не являясь при этом компромиссом между функциональностью и сложностью в освоении и использовании.
Features:
- Advanced hydraulic solver
- Detailed modeling for centrifugal and positive displacement pumps
- Scenario Manager to track all design variants and operational possibilities in a single model file
- Pump vs. system curve generation including individual head curves and composite efficiency
- Thermal analysis including piping heat transfer and heat exchanger modeling
- Supports Newtonian and non-Newtonian fluids, including non-settling slurries
- Optional ChempakTM add-on utility provides a thermophysical database of almost 700 fluids
AFT Fathom add-on modules:
- Settling Slurry (SSL) - models the effects of pumping fluids containing settling solids using the Wilson/GIW method
- Extended Time Simulation (XTS) - models dynamic system behavior
- Goal Seek and Control (GSC) - identifies input parameters that yield desired output values and simulates control functions
- Automated Sizing (APS and ANS) - automate the process of sizing pipelines and piping networks based on required conditions, such as maximum pressure or minimum flow, to reduce cost or weight
Improvements:
1. Added the capability to copy Warnings and Design Alerts from the Output Primary Window. 2. Fixed an issue that could cause the application to freeze when generating certain graphs in property windows. 3. Fixed an issue that caused the Undefined Objects panel to open unexpectedly after visiting the Pipes and Junctions panel in Analysis Setup. 4. Corrected a program behavior that allowed users to check out both ANS Module and GSC Module at the same time, which should not be allowed. 5. Improved Analysis Setup 'Same as Parent' feature to support more data fields. 6. Fixed an issue that caused Output to clear without warning if junctions were moved on the Workspace with ctrl+click. 7. When switching between Design Alerts for junctions of the same type, the previously checked (selected) items would remain selected. This was only a display issue and did not actually change the Design Alert. 8. Fixed an issue in Graph Results where Opening Select Palette window then canceling resets all colors - it does not keep the previous colors. 9. Fixed various issues with Output right-click menu command visibility. 10. Fixed an issue where the "Batch Run Status" form ends up behind the main application form. 11. Fixed Issue: Model Data tab not showing updated parameters after using Global Edit. 12. Changed the behavior of the Scenario Tree in the Quick Access Panel. The tree will now keep its collapse/expand state for all nodes after a 'clone', 'create child', or 'delete' operations. 13. Fixed an issue where the Property Window during Import will float over all other windows. 14. Fixed an issue where the Quick Access Panel (QAP) properties tab not updating after selecting a workspace object using the Search tool. 15. Fixed several language phrases that were not translating properly. 16. Changed Output Grid right-click logic to allow quick graph plots in more cases, such as columns with some numeric and some N/A data. 17. Fixed an issue that prevented Submerged Pump modeled junctions from being exported to EPANET. 18. Added junction name to the Design Alert report in the Output. 19. Fixed an issue that prevented annotations from translating on the workspace when Arrange->Scale/Flip Workspace was used. 20. Updated the Startup window's Model Preference's pane to require the user to click "Remember My Preferences and Hide" in order to apply the selection in the Units section. 21. Corrected a program behavior that allowed users to check out both ANS Module and GSC Module at the same time, which should not be allowed. 22. Fixed an issue where models could be run while Sliding Friction Coefficient value was not yet entered in Slurry Definition, in cases where it should have been required to run. 23. Fixed an issue that caused Relief Valves to be defined when Exit Temperature was not entered and should have been required.
Video tutorials |
|
Читать статью дальше (комментариев - 10)
| |
|
|
Автор: Williams
Дата: 16 декабря 2022
Просмотров: 666 |
|
Applied Flow Technology Impulse v9.0.1108 build 2022.11.11
Applied Flow Technology Impulse - набор инструментальных средств предоставляющих возможность работы с моделью в интерактивном режиме через графический интерфейс, инструментарий включает встроенную библиотеку экспертных знаний по проблеме гидроудара. Applied Flow Technology Impulse позволяет создавать проект-дизайн системы трубопровода с большей степенью защищенности, надежности и безопасности исключая потенциально опасные эффекты гидроудара и других нежелательных неустановившихся режимов.
Primary Features of AFT Impulse:
- Advanced transient solver based on Method of Characteristics.
- Built-in steady-state solver to automatically initialize waterhammer transient.
- Detailed pump inertial modelling for trips and start-ups including state-of-the-art, four quadrant methods.
- Built-in library of fluids and fittings.
- Models liquid column separation caused by transient cavitation.
- Extensive cavitation modelling.
- Scenario Manager to track all design variants and operational possibilities in a single model file with data linkage.
- Comprehensive relief valve modelling.
- Integrated graphing and reporting.
- Animation features to dynamically graph transients.
- Create video files from animations to share your results.
- Generates force imbalance files that can be automatically read into CAESAR II and TRIFLEX pipe stress dynamic models.
- Built-in intelligence to guide you in building better models.
|
|
Читать статью дальше (комментариев - 7)
| |
|
|
Автор: Williams
Дата: 10 декабря 2022
Просмотров: 2 216 |
|
Applied Imagery Quick Terrain Modeller v8.4.0 build 82836 x64 USA Edition
Quick Terrain Modeler is the world's premier 3D point cloud and terrain visualization software package. Designed for use with LiDAR, but flexible enough to accommodate other 3D data sources, Quick Terrain Modeler provides an easy to use software experience that allows users to work with significantly more data, render larger models, analyze data faster, and export a variety of products. These benefits enable very powerful, yet simple and intuitive, terrain exploitation.
Sample and training data can be found here |
|
Читать статью дальше (комментариев - 8)
| |
|
|
Автор: Williams
Дата: 2 июля 2022
Просмотров: 675 |
|
Applied Flow Technology Impulse v9.0.1102 build 2022.05.11
Applied Flow Technology Impulse - набор инструментальных средств предоставляющих возможность работы с моделью в интерактивном режиме через графический интерфейс, инструментарий включает встроенную библиотеку экспертных знаний по проблеме гидроудара. Applied Flow Technology Impulse позволяет создавать проект-дизайн системы трубопровода с большей степенью защищенности, надежности и безопасности исключая потенциально опасные эффекты гидроудара и других нежелательных неустановившихся режимов.
Primary Features of AFT Impulse
- Advanced transient solver based on Method of Characteristics.
- Built-in steady-state solver to automatically initialize waterhammer transient.
- Detailed pump inertial modelling for trips and start-ups including state-of-the-art, four quadrant methods.
- Built-in library of fluids and fittings.
- Models liquid column separation caused by transient cavitation.
- Extensive cavitation modelling.
- Scenario Manager to track all design variants and operational possibilities in a single model file with data linkage.
- Comprehensive relief valve modelling.
- Integrated graphing and reporting.
- Animation features to dynamically graph transients.
- Create video files from animations to share your results.
- Generates force imbalance files that can be automatically read into CAESAR II and TRIFLEX pipe stress dynamic models.
- Built-in intelligence to guide you in building better models.
|
|
Читать статью дальше (комментариев - 8)
| |
|
|
Автор: Williams
Дата: 1 июля 2022
Просмотров: 565 |
|
Applied Flow Technology Arrow v9.0.1109 build 2022.05.11
Applied Flow Technology Arrow - отличная программа для гидравлического расчета различных разветвленных сетей со сжимаемыми средами (включает также расчет теплопотерь). Осуществляет анализ системы при скоростях вплоть до звуковой (также включен анализ сети при звуковом ударе).
|
|
Читать статью дальше (комментариев - 5)
| |
|
|
Автор: Williams
Дата: 26 июня 2022
Просмотров: 846 |
|
Applied Flow Technology xStream v2.0.1100 build 2022.06.08
AFT xStream is a powerful fluid dynamic simulation tool for high-speed, acoustic transients that occur in steam and gas piping systems. Uncertainty in design and operations costs money and time. Now you can accurately simulate how your steam and gas systems will respond to potentially harmful transient events.
Primary Features of AFT xStream:
- Built-in steady-state solver to automatically initialize system before the transient.
- Automatic pipe sectioning based on steady-state acoustic velocities.
- Compound transient event logic to model complex control sequences.
- Scenario Manager to track all design variants and operational possibilities in a single model file.
- Integrated graphing and reporting.
- Animation tools for visual interpretation of complex transient interactions.
- Generates force imbalance files that can be automatically read into CAESAR II, ROHR2, AutoPIPE and TRIFLEX pipe stress dynamic models.
- 2D flow diagram or isometric view interface.
- Built-in libraries of fluids (including NIST REFPROP and ASME Steam Tables) and fittings which can be extended and customized.
- Chempak add-on utility provides a thermophysical database of almost 600 gases - allows you to define non-reacting pre-mixtures and simulate dynamic flow mixing
|
|
Читать статью дальше (комментариев - 9)
| |
|
|
Автор: Williams
Дата: 16 декабря 2021
Просмотров: 1 377 |
|
Applied Flow Technology Fathom v12.0.1100 build 2021.11.05
Applied Flow Technology Fathom - программно-аналитический комплекс моделирования потока в трубопроводе. Удобный графический интерфейс, встроенная библиотека оборудования, арматуры и флюидов, широкие аналитические возможности, схематическое изображение создаваемого объекта, все это реализовано в AFT Fathom и предоставляет инженеру проектировщику возможность системного подхода в реализации проектов любой сложности. AFT Fathom обладает большим спектром возможностей не являясь при этом компромиссом между функциональностью и сложностью в освоении и использовании.
Features:
- Advanced hydraulic solver
- Detailed modeling for centrifugal and positive displacement pumps
- Scenario Manager to track all design variants and operational possibilities in a single model file
- Pump vs. system curve generation including individual head curves and composite efficiency
- Thermal analysis including piping heat transfer and heat exchanger modeling
- Supports Newtonian and non-Newtonian fluids, including non-settling slurries
- Optional ChempakTM add-on utility provides a thermophysical database of almost 700 fluids
AFT Fathom add-on modules:
- Settling Slurry (SSL) - models the effects of pumping fluids containing settling solids using the Wilson/GIW method
- Extended Time Simulation (XTS) - models dynamic system behavior
- Goal Seek and Control (GSC) - identifies input parameters that yield desired output values and simulates control functions
- Automated Sizing (APS and ANS) - automate the process of sizing pipelines and piping networks based on required conditions, such as maximum pressure or minimum flow, to reduce cost or weight
|
|
Читать статью дальше (комментариев - 8)
| |
|
|
Автор: Williams
Дата: 15 декабря 2021
Просмотров: 576 |
|
Applied Flow Technology Impulse v8.0.1120 build 2021.11.02
Applied Flow Technology Impulse - набор инструментальных средств предоставляющих возможность работы с моделью в интерактивном режиме через графический интерфейс, инструментарий включает встроенную библиотеку экспертных знаний по проблеме гидроудара. Applied Flow Technology Impulse позволяет создавать проект-дизайн системы трубопровода с большей степенью защищенности, надежности и безопасности исключая потенциально опасные эффекты гидроудара и других нежелательных неустановившихся режимов.
Primary Features of AFT Impulse 8
- Data can be compared between multiple scenarios to show changes made
- Multi-scenario graphing allows easy comparison of results
- Multi-level undo and redo on the Workspace
- New capability to model unsteady friction
- Single or multiple transient Force Sets can be defined directly from the Workspace
- Improved intelligence on when a model needs to be saved to preserve the output
- Magnifier tool to quickly view objects on the Workspace
- Allow pipe/junction editing while the Undefined Items panel is shown
- Double-click on a junction on the Toolbox to add multiple to the workspace (similar to pipes)
- Forces can now be shown in the Visual Report
- New capability to model unsteady friction
- Convert intermediate elevations to new pipes and branches
- New pump four-quadrant curves added
- Ability to import custom Fittings & Losses from Excel
- Design Alerts and can be saved to and loaded from a file
- Export forces to AutoPIPE
- X-Y-Z directions (unit-vector) can now be added to a force for exporting
|
|
Читать статью дальше (комментариев - 6)
| |
|
|
Автор: Williams
Дата: 14 декабря 2021
Просмотров: 493 |
|
Applied Flow Technology Arrow v8.0.1122 build 2021.10.18
Applied Flow Technology Arrow - отличная программа для гидравлического расчета различных разветвленных сетей со сжимаемыми средами (включает также расчет теплопотерь). Осуществляет анализ системы при скоростях вплоть до звуковой (также включен анализ сети при звуковом ударе).
|
|
Читать статью дальше (комментариев - 3)
| |
|
|
ПОИСК ПО САЙТУ |
|
|
|
КАЛЕНДАРЬ | |
|
« Октябрь 2024 » |
---|
Пн | Вт | Ср | Чт | Пт | Сб | Вс |
---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | |
|
| |
|
|