Автор: Williams Дата: 26 сентября 2015
Просмотров: 1 474
Applied Flow Technology Fathom 9 build 2015.09.01
Applied Flow Technology Fathom - программно-аналитический комплекс моделирования потока в трубопроводе. Удобный графический интерфейс, встроенная библиотека оборудования, арматуры и флюидов, широкие аналитические возможности, схематическое изображение создаваемого объекта, все это реализовано в AFT Fathom и предоставляет инженеру проектировщику возможность системного подхода в реализации проектов любой сложности. AFT Fathom обладает большим спектром возможностей не являясь при этом компромиссом между функциональностью и сложностью в освоении и использовании.
Разработанные на платформе AFT Fathom дополнительные модули расширяют возможности моделирования в трех областях:
XTS - eXended Time Simulation, моделирование неустановившихся режимов во времени.
GSC - Goal Seek and Control, автоматизация определения соотношения исходных значений с требуемыми значениями, для контроля процесса вычисления внутри системы.
Автор: Williams Дата: 25 сентября 2015
Просмотров: 875
MixZon CORMIX v9.0 GTR
CORMIX is the most comprehensive tool available for mixing zone modeling and analysis, wastewater outfall design, optimization, management, and monitoring. CORMIX has improved capabilities for modeling drilling muds and cuttings discharges from offshore oil and gas operations. The new version includes an updated CorPlot tool which can be used to graph bottom sediment deposition plots and other 2D/3D graphics that help with the analysis of model results from simulations of discharges during typical drilling operations. The model and post processing capabilities have been updated and improved to be able to perform time series analysis of depth varying ambient conditions usually encountered during such offshore operations. CORMIX v9.0 GTR has now been updated to dynamically couple with a Far-Field model like Delft-3D FLOW. The coupling allows for the dynamic linking of the two models, communicating and running concurrently on different computers. The CorHyd multiport diffuser design tool with advanced graphics and hydraulics analysis has been updated to support most common wastewater discharges, including vertical multiport diffuser designs.
Автор: Williams Дата: 24 сентября 2015
Просмотров: 39 872
GEO-SLOPE GeoStudio 2012 v8.15.1.11236
GEO-SLOPE GeoStudio - программный комплекс для решения инженерно-геологических задач и моделирования грунтовых конструкций. Данны пакет состоит из 8 продуктов: SLOPE/W - анализ устойчивости откосов; QUAKE / W - динамический анализ землетрясения; AIR / W - анализ потока воздуха; SEEP / W - анализ просачивания грунтовых вод; TEMP / W - геотермальный анализ; VADOSE/W - анализ зон аэрации и анализ почвенного покрова; SIGMA / W - анализ напряженно-деформированного состояния; CTRAN / W - анализ загрязнений транспорта.
GeoStudio is a product suite for geotechnical and geo-environmental modeling, broad enough to handle all your modeling needs. The suite consists of 8 products: SLOPE/W for slope stability; SEEP/W for groundwater seepage; SIGMA/W for stress-deformation; QUAKE/W for dynamic earthquake; TEMP/W for geothermal; CTRAN/W for contaminant transport; AIR/W for air flow; VADOSE/W for vadose zone & covers.
Автор: Williams Дата: 23 сентября 2015
Просмотров: 1 219
Nirvana Technologies PLUS 2D Metal/Glass/Wood v9.62
PLUS 2D is a state of the art nesting software for generating optimized layouts and reducing scrap generated by 2 Dimensional cutting processes. It finds application in varied industries such as Glass cutting, Sheet Metal layout, Plate Cutting and fabrication, Wood working, Building panel, Carpet, PCB, acrylics etc. Whether your stock is in the form of Sheets or Coils (rolls), once you define your cutting job, the layout software requires just one mouse click to arrange the parts on appropriate stocks. It requires minimum skill and effort from the operator for generating the optimized layouts.
LateralK is used to calculate lateral earth pressure.
NovoBPT is designed for correcting raw BPT blow counts (Nb) and converting them to SPT blow counts (N60).
NovoCPT program is designed for interpretation of cone penetration test data.
NovoFORMULA is used to estimate unknown soil parameters based on known parameters.
NovoLAB is the most comprehensive geotechnical software for lab data management and borehole log drafting.
NovoLIQ software is designed for soil liquefaction analysis and supports variety of field tests.
NovoSPT is a unique geotechnical software designed for correlating SPT blow counts (N) to various soil properties using 300 correlations.
PEYSANJ is designed for bearing capacity and settlement analysis, earth pressure calculation, plate load test and pressure-meter test processing.
Use VisLog to convert your borehole logs to a 3D, interactive model of subsurface soil layers without the hassle of using expensive and complex computer programs.
Автор: Williams Дата: 20 сентября 2015
Просмотров: 1 589
CarlsonSurveyEmbedded2015
Carlson Survey 2015 with AutoCAD Embedded is Carlson's feature-rich, intuitive surveying office software with the AutoCAD 2013 engine. Carlson Survey gives users upgrades to core features like the coordinate database, Field-to-Finish coding and cut sheets, as well as new commands, including one to twist points to a 3D view, among its many additional improvements. Here’s a surveying software solution that is extremely versatile as well as a real time- and money-saver. As it always has, Carlson Survey works like a surveyor thinks. The #1 office software solution for surveyors in the United States, Carlson Survey supports AutoCAD and comes with IntelliCAD built-in. This is in addition to working on legacy AutoCAD versions. Carlson Survey delivers on customer feature requests with many useful improvements to existing commands along with many new commands. The user-interface also has a fresh look with a score of new and updated icons, plus an optional ribbon toolbar.
New in 2015
Field To Finish – Added special pipe feature coding with ability to create pipe network (.sew) file. For tree feature coding, added option for drip as diameter instead of radius, added option for solid circle for trunk and option for relative tree size for the symbols. Added control for separate layers for the point attribute block and point node. Added new AFIT special code for making a curve tangent through a series of three curve points. Added method for dynamic templates with variable horizontal and vertical offsets by using the OH and OV special codes. Added settings file default distinct point layer prefix/suffix. Added separate text size settings for attribute text labels and point block attributes.
Edit Field To Finish Codes – New command to go directly to the code table editor.
SurvNET – Added error report for individual observations to track down blunders. Added import for TDS GPS vectors.
Edit Process Level Data – Added support for processing with zero horizontal distances.
Carlson Cloud – New command for communicating with SurvCE for sending messages, data files and crew locations.
Report Distance Scale – Added methods for grid/ground factors on-the-fly in addition to a fixed factor.
3D Transformations – Added 3D coordinate transformations.
Point Group Manager – Added method to create point group by offset distance from alignment polyline.
Move Point Attributes With Leader – Added controls for attribute order and ability for curved leaders.
Import Text/ASCII File – Added method import from text with fixed widths and method to use inclusion/exclusion perimeters.
Legal Description – Added method to report station/offset using a reference centerline. Added method for reporting with geodetic mean angle and geodetic distances.
Cut Sheet – Added method to get station/offset from the point description coding. Added field for design point description.
Offset Points By Interval – New command to create offset points along an alignment.
Label Coordinates – Added options to include a description, to use Mtext, to draw the labels at an angle and option for mleader.
Draw Legend – Added method to put each symbol or a specific layer.
Ventsim was originally introduced to mining operations in 1994 to help visually design, improve and optimize underground ventilation systems. It is now licensed to over 1000 mine sites, consultants, universities, governments and research agencies around the world. The new Ventsim Visual ventilation software was released in 2009 and offers a graphically rich and dynamic ventilation environment with many more features than the original Ventsim Classic. Ventsim Visual is available in three versions: Standard, Advanced and Premium.
Ventsim Visual Standard is a lower cost version based on incompressible flow simulation routines and includes dynamic animated 3D graphics showing real airway dimensions and shapes together with animated air flows. Colours show over 30 different data types including airflow, velocities, various pressures and costs. In addition, the Standard version comes with contaminant spread routines to help predict steady state flow of gases, dust, fumes and smoke.
Ventsim Visual Advanced uses advanced compressible flow modelling, including automatic density and fan curve adjustment, automatic natural ventilation simulation and prediction of temperatures and humidity due to rock strata, auto compression, diesel equipment and electric motors.
Ventsim Visual Premium includes all features of Ventsim Visual Advanced as well as VentFIRE fire simulation, VentLog ventilation survey record software, and the optional LiveView remote data connection and display module.
Автор: Williams Дата: 18 сентября 2015
Просмотров: 1 387
ADAPT FELT 2014.1
ADAPT-FELT is the industry standard program for the calculation of elongations, friction loss, and long-term stress loss in prestressing tendons. It covers both bonded and unbonded tendons with regular or irregular geometries in two or three dimensions. In addition to a detailed tabular report, the program displays the geometry of tendon and the distribution of stress along the tendon. It is applicable to commercial and residential buildings, ground supported slabs, bridge structures, foundations and piles.
For buildings, frames, bridges and special structures: Two and three dimensional tendon layout; Use the program's library of tendon shapes or define your own tendon profile; One and two-end tendon stressing; Anchorage seating loss (draw-in); Elongation calculation for first and second pull; Code check for maximum stresses; Long-term stress losses for unbonded and bonded tendons; Graphical display of tendon stress and shape; Tabular listing of tendon heights.
Автор: Williams Дата: 17 сентября 2015
Просмотров: 2 234
ADAPT PT/RC 2015.0
ADAPT-PT/RC is a highly efficient, reliable, fast, and easy-to-use software for the analysis, design, and investigation of any concrete project. It supports concrete beams, pan joist, one-way and two-way slabs systems - for conventionally reinforced (RC) and/or post-tensioned (PT) projects.
Imagine the benefit of only maintaining one software and learning one workflow for all PT&RC beam and slab designs. The new ADAPT-PT/RC is designed for engineers that need the flexibility of designing both types of projects efficiently, without the added hassle and cost of maintaining multiple software licenses. Seamlessly jump between PT and RC modes of the software or convert a model you are working on in the same program session.
Beyond offering the flexibility of designing both RC and PT projects, this new release includes improvements in the modeling workflow, advanced analysis capabilities, expanded DXF output, and greater reporting options.
Added features include:
PT and RC design modes
Ability to switch models between design modes
Improved segmental input modeling for complex geometries
Explicitly design for crack width under Euro Code option
Reporting and graphing of crack width
Reporting and graphing of long-term deflection for design sections
Improved program operability on network drives/servers
Active entry of PT force/width in Recycling Window
Extended reporting of patterned live load deflections
Автор: 
Дата: 26 сентября 2015
Просмотров: 1 474 
