Deep Excavation DeepEX 2023 v23.22

DeepEX is an innovative, easy to use, software program for deep excavations, developed by experts for engineers like you. It can perform both geotechnical and structural design for many wall types that include soldier pile walls, sheet pile walls, and diaphragm walls with multiple sections of reinforcement. DeepEX can also perform slope stability analysis with soil nailing. It comes packed with all structural and geotechnical design codes. DeepEX is an upgrade to our DeepEX 16 and DeepXcav 2012 versions.

What does DeepEX do?

• Deep excavation design: DeepEX helps you design deep excavations by offering the most comprehensive software in the world. Many clients have performed designs within 25% of the original time required time.
• Cost estimation: DeepEX is now the only software that offers preliminary cost estimation and quantity take offs.
• Slope stability: DeepEX also performs slope stability analyses so that you do not have to export data to another package, thus saving you time. Checkout below a slope stabilization analysis in Portland, Oregon, with reinforced concrete piles and ground anchors, during an extreme seismic event.
• Analysis methods: DeepEX is the only software in its category that can analyze a wall with limit-equilibrium or elastoplastic methods. In the elastoplastic analysis, the soil is divided in active and passive non-linear soil springs. In the elastoplastic analysis, the lateral soil pressures depend on the soil properties and the proposed construction stage history.
• Building Damage Assessment: DeepEX is the only software that can easily assess the damage potential of ajdacent buildings next to an excavation. DeepEX uses thorough methods to estimate potential crack widths and building settlement in three dimensions. The program then accesses for critial building elemens the damage potential as negligible, slight, moderate, severe, or very severe.
• Design standards: DeepXcav implements a wide range of US and European design standards. These include: AISC, ACI, AASHTO, AS 3600, BS, BS 5950-2000, EC2, EC3, EC7, DIN, DM08, etc.
• Frame Analysis: DeepEX allows you to create the full frame of your deep excavation, and optimize all members within typically 5 minutes.
• Export to DXF: DeepEX has a new module that allows you to export 80% drawings to DXF. You can export multiple stages and create stage sequencing diagrams. You can also export stages with result diagrams.
• Pile Supported Abutments: Evaluate pile supported abutments with all pile types for lateral and vertical pile loads, and also examine their effects on an adjacent excavation.

Deep Excavation DeepEX 2022 v22.02

DeepEX is an innovative, easy to use, software program for deep excavations, developed by experts for engineers like you. It can perform both geotechnical and structural design for many wall types that include soldier pile walls, sheet pile walls, and diaphragm walls with multiple sections of reinforcement. DeepEX can also perform slope stability analysis with soil nailing. It comes packed with all structural and geotechnical design codes. DeepEX is an upgrade to our DeepEX 16 and DeepXcav 2012 versions.

What does DeepEX do?

• Deep excavation design: DeepEX helps you design deep excavations by offering the most comprehensive software in the world. Many clients have performed designs within 25% of the original time required time.
• Cost estimation: DeepEX is now the only software that offers preliminary cost estimation and quantity take offs.
• Slope stability: DeepEX also performs slope stability analyses so that you do not have to export data to another package, thus saving you time. Checkout below a slope stabilization analysis in Portland, Oregon, with reinforced concrete piles and ground anchors, during an extreme seismic event.
• Analysis methods: DeepEX is the only software in its category that can analyze a wall with limit-equilibrium or elastoplastic methods. In the elastoplastic analysis, the soil is divided in active and passive non-linear soil springs. In the elastoplastic analysis, the lateral soil pressures depend on the soil properties and the proposed construction stage history.
• Building Damage Assessment: DeepEX is the only software that can easily assess the damage potential of ajdacent buildings next to an excavation. DeepEX uses thorough methods to estimate potential crack widths and building settlement in three dimensions. The program then accesses for critial building elemens the damage potential as negligible, slight, moderate, severe, or very severe.
• Design standards: DeepXcav implements a wide range of US and European design standards. These include: AISC, ACI, AASHTO, AS 3600, BS, BS 5950-2000, EC2, EC3, EC7, DIN, DM08, etc.
• Frame Analysis: DeepEX allows you to create the full frame of your deep excavation, and optimize all members within typically 5 minutes.
• Export to DXF: DeepEX has a new module that allows you to export 80% drawings to DXF. You can export multiple stages and create stage sequencing diagrams. You can also export stages with result diagrams.
• Pile Supported Abutments: Evaluate pile supported abutments with all pile types for lateral and vertical pile loads, and also examine their effects on an adjacent excavation.

Deep Excavation SnailPlus 2019 v19.0.7

Snail Plus is soil nail analysis software. While soil nailing is also available in our DeepXcav software program, SnailPlus was created to bring all the necessary capabilities into one package. The software follows the FHWA methodology for the design of soil nail walls, in an interactive environment built on the DeepEX basic layout. This means that you can include all intermediate construction stages for your soil nail wall, include 3D loads, all in an interactive environment. Last, SnailPlus is the only software that produces a full printable report of all design calculations.

Who uses Snail-Plus? Many companies including deparment of transportation such as Texas DOT, WASH-DOT, GZA, Hayward Baker, ESC Limited, D'Appolonia, Berkel Construction, and more!

Deep Excavation DeepFND 2020 v2.01

DeepFND is a powerful interactive software for deep foundation and pile design. Axial, lateral, settlement, structural and geotechnical analysis options. Incorporates AASHTO, FHWA, IBC, and Eurocode 7 standards.

Pile types: drilled piles, driven concrete, driven steel, driven timbe piles, monotube, CFA piles, drilled-in-displacement piles, micropiles, caissons, helical piles (Premium version)

Methods:

• Settlement analysis, with linear, exponential, and other models
• Lateral pile analysis
• FHWA GEC8
• FHWA GEC10
• AASHTO Norlund
• Eurocode 7
• IBC 2015 standards
• NYC Building Code
• AASHTO LRFD
• Automatic pile length optimization based on geotechnical capacity
• Automatic pile length optimization based on settlement response

Deep Excavation DeepEX (ex. DeepXcav) 2019 v19.1

DeepEX is an innovative, easy to use, software program for deep excavations, developed by experts for engineers like you. It can perform both geotechnical and structural design for many wall types that include soldier pile walls, sheet pile walls, and diaphragm walls with multiple sections of reinforcement. DeepEX can also perform slope stability analysis with soil nailing. It comes packed with all structural and geotechnical design codes. DeepEX is an upgrade to our DeepEX 16 and DeepXcav 2012 versions.

What does DeepEX do?

• Deep excavation design: DeepEX helps you design deep excavations by offering the most comprehensive software in the world. Many clients have performed designs within 25% of the original time required time.
• Cost estimation: DeepEX is now the only software that offers preliminary cost estimation and quantity take offs.
• Slope stability: DeepEX also performs slope stability analyses so that you do not have to export data to another package, thus saving you time. Checkout below a slope stabilization analysis in Portland, Oregon, with reinforced concrete piles and ground anchors, during an extreme seismic event.
• Analysis methods: DeepEX is the only software in its category that can analyze a wall with limit-equilibrium or elastoplastic methods. In the elastoplastic analysis, the soil is divided in active and passive non-linear soil springs. In the elastoplastic analysis, the lateral soil pressures depend on the soil properties and the proposed construction stage history.
• Building Damage Assessment: DeepEX is the only software that can easily assess the damage potential of ajdacent buildings next to an excavation. DeepEX uses thorough methods to estimate potential crack widths and building settlement in three dimensions. The program then accesses for critial building elemens the damage potential as negligible, slight, moderate, severe, or very severe.
• Design standards: DeepXcav implements a wide range of US and European design standards. These include: AISC, ACI, AASHTO, AS 3600, BS, BS 5950-2000, EC2, EC3, EC7, DIN, DM08, etc.
• Frame Analysis: DeepEX allows you to create the full frame of your deep excavation, and optimize all members within typically 5 minutes.
• Export to DXF: DeepEX has a new module that allows you to export 80% drawings to DXF. You can export multiple stages and create stage sequencing diagrams. You can also export stages with result diagrams.
• Pile Supported Abutments: Evaluate pile supported abutments with all pile types for lateral and vertical pile loads, and also examine their effects on an adjacent excavation.

Deep Excavation RCsolver v2.2.2.0

Deep Excavation Steel Connect 2011

Steel Connect is a user friendly affordable steel connection software that can be a valuable design tool for the typical structural engineer. Typical steel connections can be designed in less time using the autodesign feature or user specified steel connections can be investigated. Design simple shear bolted or welded connections, full moment connections, end plate connections.

Более подробно тут.