CSI PERFORM-3D v5.0.0

CSI PERFORM-3D was designed for nonlinear analysis and performance assessment for 3D structures.

Displacement Based Design

• Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis.
• Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational.
• Strength-based design considers inelastic behavior only implicitly.
• Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis.
• Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength.
• PERFORM-3D allows you to use displacement-based design.

Implementation of ASCE 41

• Procedures for displacement-based design using inelastic analysis are specified in ASCE 41, “Seismic Rehabilitation of Existing Buildings”.
• ASCE 41 applies to the retrofit of existing buildings, but the procedures can be applied to the design of new buildings.
• PERFORM-3D implements the procedures in ASCE 41.
• However, PERFORM-3D is a general tool for implementing displacement-based design. It is not limited to ASCE 41.

Capacity Design

• The response of a structure to earthquake ground motion, whether elastic or inelastic, is highly uncertain.
• Capacity design is a rational way to improve the response of a structure in a strong earthquake, by deliberately controlling its behavior.
• Capacity design controls the inelastic behavior of a structure, by allowing inelastic behavior only in locations chosen by the designer. In these locations the structural components are designed to be ductile. The rest of the structure remains essentially elastic, and can be less ductile.
• Controlling the behavior in this way improves reliability, reduces the amount of damage, and can reduce construction costs.
• PERFORM-3D allows you to apply capacity design principles.

What PERFORM-3D is NOT

• PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis.
• If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design.
• However, PERFORM-3D is not intended for “design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave.
• PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.

VisiMix Turbulent SV 2K7 x86

The program is a unique software tool for mathematical modeling of mixing and mixing-dependent processes in low viscosity liquids and multiphase mixtures. The program provides process parameters necessary for analysis, scaling-up and optimization of mixing tanks and reactors with all types of impellers.

The main features:

• Newtonian and non-Newtonian media.
• Comprehensive range of dimensions.
• Universal process applications.
• Built-in databases.

More info.

Global Mapper v14.1.0 build 013013 english+russian x86+x64

GlobalCAD Toolbox LT 2009

Toolbox LT is the revolutionary solution that adds 3D modeling and LISP support to AutoCAD LT... and so much more.

In today's competitive environment, the spotlight is on productivity and presentation. Companies need design software that ensures them that vital competitive edge. Toolbox LT is the answer, providing the most cost effective solution for extending your design and drafting capabilities with AutoCAD LT.

Now you can design in 3D with solids and surface modeling, generate realistic shaded renders, import and manipulate graphic images and load and run Lisp utilities and ARX applications.

Toolbox LT gives you the tools to create and manage drawing objects like never before. Its unique object-authoring suite includes Block Manager, Hatch Manager, Linetype Wizard and Attribute Wizard. Now you can instantly publish intelligent block libraries, stunning hatch patterns and complex linetypes from existing drawing content. Optional one-click drawing schedules and cost estimates are also available.

GlobalCAD Organizer 2013 v1.2

 

GlobalCAD Organizer gives you the tools to create and manage drawing objects like never before! Its unique object-authoring suite includes Block Manager, Hatch Manager, Linetype Wizard and Attribute Wizard. Now you can instantly publish intelligent block libraries, stunning hatch patterns and complex linetypes from existing drawing content.

With GlobalCAD Organizer, objects are organized within distinct libraries with advanced viewing capabilities. They can be identified fast and are accessible right when you need them. Management tools ensure the library database is always up to date, with the ability to view and print library content and other details. Objects including blocks and hatch patterns can be contained on local drives or on a network.

GlobalCAD Hatch Manager 2013 v1.2

Success in design today relies on creative presentation. GlobalCAD Hatch Manager gives you the tools to create and manage outstanding hatch patterns for maximum impact!

GlobalCAD Hatch Manager provides the solution to all your hatch creation and management needs. You can build entire libraries from scratch, add existing PAT files in seconds or create your own unique patterns from existing drawing objects.

The software also links directly into the AutoCAD/Bricscad Boundary Hatch (Bhatch) dialog, ensuring all your patterns remain fully featured with essential options such as associative, non-associative, edit boundary and pattern re-scaling.

With GlobalCAD Hatch Manager, patterns are organized within distinct libraries with advanced viewing capabilities. They can be identified fast and are accessible right when you need them. Management tools ensure the library database is always up to date, with the ability to view and print pattern details and other library information. Patterns can be contained on local drives or on a network.

LibreCAD v1.0.2

LibreCAD is a free Open Source CAD application for Windows, Apple and Linux. Support and documentation is free from our large, dedicated community of users, contributors and developers. You can download, install and distribute LibreCAD freely, with no fear of copyright infringement.

LibreCAD is a feature-packed and mature 2D-CAD application with some really great advantages:

• It's free – no worry about license costs or annual fees.
• No language barriers – it's available in a large number of languages, with more being added continually.
• GPLv2 public license – you can use it, customize it, hack it and copy it with free user support and developer support from our active worldwide community and our experienced developer team.
• LibreCAD is an Open Source community-driven project: development is open to new talent and new ideas, and our software is tested and used daily by a large and devoted user community; you, too, can get involved and influence its future development.

fixed medicine and instruction for Aspen Technology aspenONE v8.0

Ну, собственно, особо писать нечего. Чуть более подробнее изложена инструкция, есть картинки, есть утилита для завершения процесса (для тех, кто не могет task manager-ом воспользоваться). Короче, все изложено более гармонично.

Aspen Technology aspenONE v8.0 DVD2

Installation of the Manufacturing and Supply Chain suite includes the following: 

• Aspen Manufacturing - including IP.21, APC and Order Execution. With aspenONE v8.0, there are now two versions of the Aspen Manufacturing and Supply Chain DVD. You must use the version that supports your commercial licensing model with AspenTech. Aspen Manufacturing and Supply Chain DVD 2 contains the media that supports perpetual and pre-aspenONE Licensing Model token-based systems. Aspen Manufacturing and Supply Chain DVD 2T contains the media that supports the aspenONE Licensing Model token-based system. If you are unsure which DVD to use, please consult the aspenONE V7.2 Deployment Guide for further guidance.
• Aspen Petroleum Supply Chain - including PIMS, Orion-XT and Olefins Scheduler.
• Aspen Petroleum Supply & Distribution - including DPO.
• Aspen Chemical Supply Chain - including Supply Planner, Plant Scheduler and Demand Management.
• aspenONE Infrastructure - including Event Manager, Role Based Visualization and Enterprise Integration Framework.

Aspen Technology aspenONE v8.0 DVD1

• Согласованность данных. Программные продукты aspenONE для инженерных расчётов и моделирования способствуют сокращению времени на реализацию проекта и делают процесс проектирования более удобным за счёт взаимной интеграции и возможности обмена данными и знаниями между специалистами и менеджерами. Надёжные средства моделирования дают большую уверенность в правильности принимаемых решений.
• Связь проектирования, управления и бизнес – процессов. За счёт открытой архитектуры программных продуктов aspenONE значительно расширяется сфера применения моделей, созданных в целях проведения инженерных расчётов. Эти модели могут быть использованы также для управления заводскими установками, оптимизации в реальном времени, планирования и принятия бизнес – решений.
• Повышение производительности и улучшение качества инженерных расчётов. Обладая наиболее полными, мощными и современными средствами моделирования и оптимизации, обширными базами данных, библиотеками модульных операций, возможностями экономического анализа, программные продукты aspenONE для инженерных расчётов и моделирования позволяют значительно сократить время на решение инженерных задач.
• Повышение рентабельности установок и сокращение периода окупаемости проекта. Точные термодинамические модели позволяют спроектировать оптимальные материальные, тепловые и вспомогательные потоки, подобрать подходящее для данного процесса оборудование, что помогает более эффективно использовать капиталовложения и повысить прибыль с минимальными дополнительными инвестициями.
• Бизнес – прогнозирование. Программные продукты aspenONE для инженерных расчётов и моделирования позволяют точно оценивать различные варианты вложения инвестиций уже на ранних этапах разработки проекта.

Все модели в программных продуктах aspenONE созданы на основе знаний технологических процессов и объединяю в себе все предыдущие инженерные инновации и достижения информационных технологий, и дают надёжные результаты, проверенные на реальных промышленных установках.

DVD1:
состав диска

 Показать / Скрыть текст

Installation of Aspen Engineering includes the following:
Process Modeling (Aspen Plus)
Process Modeling (HYSYS)
Exchanger Design and Rating
Economic Evaluation
Process Development
Basic Engineering
Operations Support
Aspen OnLine
Aspen MUSE
Aspen PIMS
Aspen Plus Based Refinery Reactors
Aspen Process Manual

Please select the Aspen Engineering or Aspen Engineering (for Upgrade) below for detail install options.

----------------

Installation of Aspen Engineering includes the following:

Process Modeling (Aspen Plus)

Process Modeling tool for steady state simulation, design, performance monitoring, optimization and business planning for chemicals, petrochemicals, fine chemicals and several other industries. The following licensable products are installed:
o Aspen Plus
o Aspen Properties
o Aspen Polymers Plus
o Aspen Distillation Synthesis (formerly Aspen Split)
o Aspen Rate-Based Distillation (formerly Aspen RateSep)
o Aspen Plus Optimizer
o Aspen Mixed Integer Optimizer (formerly Aspen MINLP Optimization)

Advanced Simulation Options
This functionality allows creation of custom models using Aspen Custom Modeler and gives the user access to advanced process simulation capabilities such as dynamic simulation, batch distillation, adsorption and utilities management.

The following licensable products are installed:
o Aspen Custom Modeler
o Aspen Model Runner
o Aspen Plus Dynamics (formerly Aspen Dynamics)
o Aspen Batch Distillation (formerly Aspen BatchSep)
o Aspen Adsorption (formerly Aspen Adsim)
o Aspen Utilities Planner
o Aspen Utilities On-Line Optimizer (formerly Aspen Utilities Operations)

Energy and Flare Analysis
This functionality consists of heat and energy integration, as well as analysis of flare systems.

The following licensable products are installed:
o Aspen Energy Analyzer (formerly Aspen HX-Net)
o Aspen Flare System Analyzer (formerly Aspen FLARENET)

Aspen Simulation Workbook
This functionality provides an Excel Add-In that connects to Microsoft Excel in a live manner.

The following licensable product is installed:
o Aspen Simulation Workbook

Process Modeling (HYSYS)

Process Modeling tool for steady state simulation, design, performance monitoring, optimization and business planning for oil and gas, petroleum refining and several other industries.

The following licensable products are installed:
o Aspen HYSYS
o Aspen HYSYS Amines™
o Aspen HYSYS Dynamics™
o Aspen HYSYS Dynamics™ Run-Time
o Aspen Pipeline Hydraulics - OLGAS 3-Phase (formerly Aspen HYSYS OLGAS 3-Phase)
o Aspen HYSYS Pipeline Hydraulics - OLGAS 2-Phase (formerly Aspen HYSYS OLGAS)
o Aspen HYSYS Pipeline Hydraulics - PIPESYS (formerly Aspen HYSYS PIPESYS)
o Aspen HYSYS Offline Optimizer (formerly Aspen RTO Offline)
o Aspen HYSYS Upstream
o Aspen HYSYS Upstream Dynamics
o Aspen HYSYS Petroleum Refining (formerly Aspen RefSYS)

Advanced Simulation Options
This functionality allows creation of simulations using Aspen Properties and allows users to setup simulation using AspenTech’s equation-oriented technology as well as refining reactor models. It also allows users to create custom models using Aspen Custom Modeler and to use custom models in the simulation.

The following licensable products are installed:
o Aspen Custom Modeler
o Aspen Plus Optimizer
o Aspen HYSYS CatCracker (formerly Aspen RefSYS CatCracker)
o Aspen HYSYS Reformer (formerly Aspen RefSYS Reformer)
o Aspen HYSYS Hydrocracker (formerly Aspen RefSYS Hydrocracker)

Energy and Flare Analysis
This functionality consists of heat and energy integration, as well as analysis of flare systems.

The following licensable products are installed:
o Aspen Energy Analyzer (formerly Aspen HX-Net)
o Aspen Flare System Analyzer (formerly Aspen FLARENET)

Aspen Simulation Workbook
This functionality provides an Excel Add-In that connects to Microsoft Excel in a live manner.

The following licensable product is installed:
o Aspen Simulation Workbook

Process Development
This functionality enables Batch Process Development modeling technology as well as solvent selection technology.

The following licensable products are installed:
o Aspen Batch Process Developer (formerly Aspen Batch Plus)
o Aspen Properties (including Aspen Solubility Modeler)

Advanced Modeling Options
This capability enables advanced modeling options for the batch processing industry including batch distillation, chromatography, and reaction modeling.

The following licensable products are installed:
o Aspen Chromatography®
o Aspen Batch Distillation (formerly Aspen BatchSep)
o Aspen Reaction Modeler
o Aspen Process Tools

Operations Support

The functionality enables process models in operations.

The following licensable products are installed:
o Aspen OTS Framework
o Aspen Online Deployment
o Aspen Simulation Workbook

Aspen OnLine

The following licensable product is installed:
o Aspen OnLine

Aspen MUSE

The following licensable product is installed:
o Aspen MUSE

Aspen PIMS

The functionality enables planning and optimization of refinery processes.

The following licensable products are installed:
o Aspen PIMS
o Aspen MPIMS
o Aspen PIMS Advanced Optimization™
o Aspen PIMS Submodel Calculator™

Aspen Plus Based Refinery Reactors

The following licensable products are installed:
o Aspen Plus CatCracker (formerly Aspen FCC)
o Aspen Plus Reformer (formerly Aspen CatRef)
o Aspen Plus Hydrocracker (formerly Aspen Hydrocracker)
o Aspen Plus Hydrotreater (formerly Aspen Hydrotreater)

Aspen Process Manual

This feature installs the following licensable product:

------------------------

Installation of Aspen Engineering (for Upgrade) includes the following:

Exchanger Design and Rating

This functionality consists of thermal and mechanical design, cost estimation and drawings for heat exchangers.

The following licensable products are installed:
o Aspen Air Cooled Exchanger (formerly Aspen ACOL+)
o Aspen Fired Heater (formerly Aspen FiredHeater)
o Aspen Plate Fin Exchanger
o Aspen Shell and Tube Exchanger (formerly Aspen TASC+)
o Aspen Shell and Tube Mechanical (formerly Aspen Teams)
o Aspen Plate Exchanger (formerly Aspen Plate+)
o Aspen HTFS Research Network

Aspen Properties

This functionality enables the use of Aspen Properties as part of thermal and mechanical design of heat exchanger systems.

Economic Evaluation

This functionality enables cost estimation of process simulation models using detailed cost models.

The following licensable products are installed:
o Aspen Process Economic Analyzer (formerly Aspen Icarus Process Evaluator)
o Aspen In-Plant Cost Estimator (formerly Aspen Icarus Project Manager)
o Aspen Capital Cost Estimator (formerly Aspen Kbase)

Basic Engineering

The following licensable product is installed:
o Aspen Basic Engineering (formerly Aspen Zyqad)