Intergraph PV Elite 2013 SP2 x86

Intergraph PV Elite – наиболее полное решение для анализа и расчета проектируемых аппаратов, работающих под давлением, и теплообменников. PV Elite легко определяет предельное значение давления для сосудов и теплообменников, в том числе при сочетании нагрузок с заданием большого объема данных. Исходные данные в PV Elite собраны в логические группы, что упрощает их ввод. Для получения справки по любому значению достаточно один раз нажать кнопку. Графическое представление расчетной модели в PV Elite помогает определить ошибки в исходных данных и удостовериться в результатах. С PV Elite вы сможете легко и просто просматривать расчетную модель и управлять ей. PV Elite выполняет расчеты в соответствии со следующими стандартами: ASME Глава VIII Разделы 1 и 2, PD 5500 и EN 13445. Также для оценки текущего состояния и остаточного ресурса действующего оборудования используется методика API 579 (пригодность к эксплуатации). Для проверки точности расчетов в PV Elite перечисляются основные уравнения, такие как расчет толщины и максимально допустимое рабочее давление (МДРД); программа также группирует результаты по типу (например, для внутреннего или внешнего давления, для напряжения изгиба, штуцера или фланца). Программа суммирует общие результаты и определяет элемент или узел для контроля МДРП всего аппарата.

DynaRoad v5.3.3.16122

Финская компания DynaRoad Oy является разработчиком программного обеспечения и сервисов для управления проектами в области гражданской инженерии и строительства инфраструктуры, например, магистралей, туннелей, железных дорог, городских зон и портов.

ПО DynaRoad предназначено для оптимизации перемещения земляных масс, планирования на основе LBS-сервисов и контроль за производством.

Tahoe Design PumpBase v2.0c

PumpBase finds the best pumps for your fluid conveyance application. You can refine your selection by specifying up to 40 selection criteria. PumpBase's database contains thousands of curves from dozens of participating pump manufacturers. Detailed reports are created that can be submitted to pump manufacturers and sales representative for further application verification and price quotes.

Features:

• Complete pump curve database access and editing.
• Communicates with HYDROFLO for system curve development.
• Quick affinity law conversions for speed and trim.
• Extensive and editable liquid property database.
• Automatic viscosity corrections to pump curves.
• Efficiency and NPSHR curves are plotted on pump graphics.
• Both English and SI (metric) units.
• User Project files save all selection information.
• Technical Bulletins/Dimensional Schematics available.
• Liquid temperature rise calculations.

Operation:
View all pumps by default. As you add restrictions, the database is filtered for those criteria. Optionally specify operating point data TDH (total dynamic head) and operating flow to select pumps whose operating envelopes include the operating point. Specify NPSHA (Net Positive Suction Head Available) to restrict selection to pumps whose NPSH required is adequate for operation. Specify (or select) liquid property data to obtain pumps that can provide the required flow and TDH. Enter just the pumped liquid properties and view pump curves with viscosity corrections applied. Manual correction factors can be specified and applied to stocks, slurries and other liquids. Specify additional selection criteria such as specific manufacturer, curve key, series/model, speed, 60/50 Hz, max sphere size, pump orientation (horizontal, vertical, in-line, side-suction, end-suction), application type (fire, well, process, sludge/slurry, dewatering, sewage, wastewater, HVAC), features (portable, submersible, split-case, solids handling, non AC powered, self-priming, high temperature, high corrosive, ANSI, ISO 2858).

GeoStru GeoUtility v2012.11.0.509

GeoUtility - collection of support software for professionals involved in geological, geotechnical and structural sectors.

GeoStru MDC v2012.15.1.587

MDC is a software product for the design and analysis of reinforced concrete retaining walls either resting on their own foundation or on piles, optionally supported by tiebacks. The geotechnical computation employs the standard geotechnical methods subject to user choice and carries out the verifications prescribed by standard selected, amongst which global stability even in seismic conditions. Structural evaluations performs reinforcements sizing and verification with Ultimate Limit State or Allowable Tensions.

Supported computation standards: Eurocod 7/8, NTC 2008, STAS, British Codes BS8004/BS8110.

SusProg3D v4.517F build 842.5

SusProg3D is the premier kinematic suspension design and analysis tool. More info.

GeoStru Slope 2013 v8.18.1.1001

Slope carries out the analysis of soil or rock slope stability both in static and seismic states utilizing the limit equilibrium methods of Fellenius, Bishop, Janbu, Bell, Sarma, Spencer, Morgenstern & Price and Discrete elements method (DEM) for circular and non circular surfaces by which it is possible to ascertain slippages in the slope, examine a gradual failure, and employ various models of force-deformation relationship. Reinforcements with piles, gravity and/or reinforced concrete bracing walls, nettings, geofabrics, anchors, and terracing may be specified. Distributed and point loads may be defined.

GeoStru Stratigrapher v2012.20.0.252

Stratigrapher enables the construction of stratigraphic columns for geologic or geotechnical usage and further the documentation of well construction. User form design is enabled through the provision of a document template editor. The resultant documentation model(s) can be stored for reuse. Thereafter the selection of documentation format is by the selection of templates. On the document, adjacent columns, user selected by choice of template, present the lithologic, lithotypes and exploration characteristic recorded during trial borings or well construction characteristics. Bitmap patterns are inserted directly from supplied libraries whose background and texture images may be user updated and personalized. The program permits simple modification of the elevation level of lithologic properties and the insertion of the standard trial results obtained during borings (Packet, Vane, sampling and Phreatic water table etc.) The document so produced may be saved as well as printed directly and the saved copy may be used permits their export and insertion in the profiles of other GeoStru programs.

GeoStru LoadCap v2012.15.0.559

LoadCap id design for the computation of limit load in loose soils or rock, according Terzaghi, Meyerhof, Hansen, Vesic, Brinch-Hansen, Richards etc. Al, the computation of bearing capacity factors (according to the instructions for the geotechnical design in seismic areas - Italian Association of Geotechnical Engineering).

Settlements: Elastic (Timoshenko and Goodier), Oedometric, Schmertmann, Burland & Burbidge, liquefaction usig the method of Seed and Idris (1971). The settlements can be calculated at any point either inside or outside the foundation. Limit load in seismic conditions: SHIKHIEV & JAKOVLEV, RICHARDS, NTC 2008 Circolare applicativa.

Diagrams: Limit load as a function of the foundation base, of the depth of the bearing surface, of the acting loads. Unlimited number of layers. Display of pressure bulbs and failure wedges.

Supported computation standards: Eurocode 7/8, British Codes BS8004, Norme tecniche costruzioni (NTC 2008), NTC - Circolare 2 Febbraio 2009, n. 617, C.S.L.LPP.

GeoStru Dynamic Probing v2012.18.0.423 + Static Probing v2012.12.1.339

Dynamic Probing.This software performs Dynamic Penetrometry, that is the reading, recording, interpretation, storage and the management of any type of penetrometer including new or custom equipment and of in borehole SPT readings. Dynamic Probing provides functions for the archiving of readings by site and for automatic calculation of the real energy transmitted, including correction for warp and the correlation coefficient with SPT (standard reference tests for geomechanic calculations and geotechnic correlations). Processing of data is instantaneous, deriving the values of Ndp&Rd and immediately generating a graphic display. In addition, the software proposes discrete layer boundaries and enables bitmaps or colors to be assigned for lithologic coding. In geotechnic calculation for coherent and incoherent terrains, several correlations are available for diverse lithologic types, which provide a more precise ‘geotechnic calibration’ for the specific trials zone.

Static Probing. This program processes and archives penetrometric equipment readings for static penetrometers such as CPT (Cone penetration test), CPTE (Cone penetration test electric) and CPTU (Cone penetration test Piezocone). Step intervals - even centimetric- are user selected. The most authoritative lithographic and stratigraphic interpretation methods are used, both the more traditional (Begemann e Schmertmann) and the more recent (Robertson, Douglas-Olsen, Koester etc.) with standard or "normalized" values for qc & fs. Stratigraphic interpretation may be performed either automatically or at user selection based on site experience. Electronic data gathering unit outputs can be input directly to the program. The program provides the facility to calculate directly bearing capacity parameters for surface or deep foundations.