|
|
Автор: Williams
Дата: 21 января 2017
Просмотров: 5 034 |
|
RUNET BETONexpress v17.01/2017
RUNETsoftware is developing structural design software for Civil engineers and Architects. The programs deal with both finite element and dynamic analysis and utilize CAD and CAM methods.
With BETONexpress you can easily design structural elements of reinforced concrete. For each structural element, you specify the basic dimensions, loads and material properties, and you obtain the detailed concrete design in ultimate limit state (ULS), and in serviceability limit state (SLS).
The dimensioning is according to Eurocode 2, EN 1992-1-1:2004, Design of concrete structures, General rules and rules for buildings, with supplement of Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules, for geotechnical analysis (footings, retaining walls), Eurocode 0, EN 1990:2002, for load combinations, and Eurocode 8 for seismic loading.
The last EN versions of the Eurocodes are implemented. You can comute also the capacity of slab, beams and column strengthened with FRP (fibre-reinforced polymers). Regular and light weight aggregate concrete included.
The program's CAD modulus automatic generates detailed drawings of the structure and the reinforcement. A combined detailed report and reinforcing steel schedule is produced for the designed concrete components. Assumptions and references to design codes are shown in the report. The reinforcing steel schedule can be edited with a specialised editor which is included. The user can select the applicable National Annex. The design code parameters, as well as default values, can be adjusted by the user. Design Charts and Tables for use and understanding of Eurocode 2 are included n the program. In addition a set of engineering tools (unit conversion, computation of areas, moments of inertia, standard steel sections etc.) are included in the program.
|
|
Читать статью дальше (комментариев - 30)
| |
|
|
Автор: Williams
Дата: 19 января 2017
Просмотров: 553 |
|
TWI CrackWISE v5.0 R29795
CrackWISE is developed for the automation of fracture and fatigue assessment procedures (BS 7910) for engineering critical assessment.
Benefits
- automates the widely-accepted flaw assessment procedure, BS 7910
- fully compatible with the fracture and fatigue clauses of BS 7910:2013. An analysis carried out using CW5 is therefore compatible with the document and traceable to the relevant clauses
- based on over 20 years of experience in software development and ECA consultancy
- extensively validated software, developed under TickIT plus
- latest advances in fracture assessment techniques incorporated
- current edition of BS 7910 in pdf included
- user-friendly interface, intuitive to both existing and new CrackWISE users
- software and technical support available from TWI experts
- future integration with TWI RiskWISE and IntegriWISE
|
|
Читать статью дальше (комментариев - 5)
| |
|
|
Автор: Williams
Дата: 18 января 2017
Просмотров: 1 475 |
|
TWI IntegriWISE v1.0.1.24840
TWI’s IntegriWISE fitness for service software is a comprehensive tool for managing and assessing plant integrity data. The software has been designed to operate with the flexibility of a stand-alone application, or the power of centralised server architecture. When it is implemented through a server, IntegriWISE can be used as a central repository for all integrity-related plant information, with the ability to record and track key design and operating data, facilitate integrity assessments, and provide traceability for integrity management decisions. As a stand-alone application, individual users have the flexibility to carry out ad-hoc calculations and analyses.
Key highlights
- automates Level 1 and Level 2 Fitness for Service (FFS) assessments described in API 579/ASME FFS-1
- all assessments are rigorous applications of a selection of the most widely used and relevant FFS standards or procedures from API and ASME (e.g. API 579-1/ ASME FFS-1 2007, ASME B31.G)
- material databases from the following design codes are included in the software: ASME VIII, ASME B31.3, ASME B31.4, ASME B31.8, PD 5500, API 650, and API 620
- IntegriWISE offers the next generation in plant integrity management systems, by allowing engineers and managers to improve safety and plant availability and to reduce outage and maintenance costs
- decision-support software designed to assist engineers in evaluating the integrity of pipework, pipelines, pressure equipment and high temperature structures
Key futures
- wide range of assessment modules for different damage mechanisms including metal loss, pitting corrosion, laminations, hydrogen damage
- wide range of equipment and component geometries including cylindrical shells, spheres, torispherical heads, elliptical heads, bends, elbows, reducers
- calculation of critical operational conditions and safe continued operating loads to applicable international standards such as API 579-1/ ASME FFS-1 2007, ASME B31G, etc. in a single software tool
- assessment management based on equipment with possible multiple assessments for each piece of equipment
- a hierarchical structure enabling multiple assessments that can be used to conduct "what-if” scenarios
- assessment reports generated in accordance with API 579-1/ ASME FFS-1 2007
- future integration with TWI RiskWISE and CrackWISE software
- users can undertake a `what if´ likelihood and consequence appraisal of each component, to determine the minimum level of inspection and maintenance, to mitigate the risk of failure and optimize the current inspection program
- provides an indication of remaining life for all damage mechanisms, based on an implicit time dimension of risk (risk of failure generally increases over time) which is the only rational basis for setting safe operating periods between inspections
|
|
Читать статью дальше (комментариев - 6)
| |
|
|
Автор: Williams
Дата: 15 января 2017
Просмотров: 2 938 |
|
RUNET BETONexpress v21.12/2016
RUNETsoftware is developing structural design software for Civil engineers and Architects. The programs deal with both finite element and dynamic analysis and utilize CAD and CAM methods.
With BETONexpress you can easily design structural elements of reinforced concrete. For each structural element, you specify the basic dimensions, loads and material properties, and you obtain the detailed concrete design in ultimate limit state (ULS), and in serviceability limit state (SLS).
The dimensioning is according to Eurocode 2, EN 1992-1-1:2004, Design of concrete structures, General rules and rules for buildings, with supplement of Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules, for geotechnical analysis (footings, retaining walls), Eurocode 0, EN 1990:2002, for load combinations, and Eurocode 8 for seismic loading.
The last EN versions of the Eurocodes are implemented. You can comute also the capacity of slab, beams and column strengthened with FRP (fibre-reinforced polymers). Regular and light weight aggregate concrete included.
The program's CAD modulus automatic generates detailed drawings of the structure and the reinforcement. A combined detailed report and reinforcing steel schedule is produced for the designed concrete components. Assumptions and references to design codes are shown in the report. The reinforcing steel schedule can be edited with a specialised editor which is included. The user can select the applicable National Annex. The design code parameters, as well as default values, can be adjusted by the user. Design Charts and Tables for use and understanding of Eurocode 2 are included n the program. In addition a set of engineering tools (unit conversion, computation of areas, moments of inertia, standard steel sections etc.) are included in the program.
|
|
Читать статью дальше (комментариев - 16)
| |
|
|
Автор: Williams
Дата: 13 января 2017
Просмотров: 3 831 |
|
Elliot Gindis - Up and Running with AutoCAD 2017 2D and 3D Drawing and Modeling
Academic Press, 2016
pdf, 730 pages, english
ISBN: 978-0-12-811058-4
Up and Running with AutoCAD 2017: 2D and 3D Drawing and Modeling presents Gindis’ combination of step-by-step instruction, examples, and insightful explanations. The emphasis from the beginning is on core concepts and practical application of AutoCAD in engineering, architecture, and design. Equally useful in instructor-led classroom training, self-study, or as a professional reference, the book is written with the user in mind by a long-time AutoCAD professional and instructor based on what works in the industry and the classroom.
- Strips away complexities and reduces AutoCAD to easy-to-understand basic concepts.
- Teaches only what is essential in operating AutoCAD, thereby immediately building student confidence.
- Fully covers the essentials of both 2D and 3D in one affordable easy to read volume.
- Presents basic commands in a documented, step-by-step guide on what to type in and how AutoCAD responds.
- Includes several complementary video lectures by the author that accompany both 2D and 3D sections.
|
|
Читать статью дальше (комментариев - 18)
| |
|
|
ПОИСК ПО САЙТУ |
|
|
|
КАЛЕНДАРЬ | |
|
« Ноябрь 2024 » |
---|
Пн | Вт | Ср | Чт | Пт | Сб | Вс |
---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | |
|
| |
|
|