ГЛАВНАЯ             ФОРУМ             БАЗА ДОКУМЕНТОВ             КОНТАКТЫ             ABOUT             RSS ПРОФИЛЬ

    Вспомнить пароль

Konekt Electra v5.91 Software
Konekt Electra v5.91

Konekt Electra v5.91

ELECTRA is a new generation of Shape-Based Autorouting software for PC boards. By contrast with traditional gridded maze autorouters, a shape-based approach allows for more efficient use of routing area and is more suited to handle complex design rules requirements of high density SMD or through holes boards and achieve the highest route completion rates. ELECTRA uses an effective multi-pass cost-based conflict reduction algorithm to find a routing solution adapting to the natural flow of the nets. Adaptive routing algorithm is the only proven approach to reach high completion rate on today’s complex PCBs. ELECTRA provides immediate feedback on the routing progress and conflict reduction rate.

- Shape based autorouting with adaptive multi-pass conflict reduction technology.
- Interactive Contour Router with Push and Shove.
- Pattern Router for fast, esthetical results and in average 20% less vias.
- Handles complex PCB designs with timing conditions such as min/max length, match length and differential pair constraints .
- Active flow with controlled autorouting of preselected interconnects.
- Real-time Verification.
- Reasonable Cost of ownership.
- PCB CAD plug-in, Specctra DSN format support.
   Читать статью дальше  (комментариев - 5)

BITControl Aqua Aero v2.1 Software
BITControl Aqua Aero v2.1

BITControl Aqua Aero v2.1

The aeration system is the most important equipment of a wastewater plant. 75% of the energy used for the wastewater treatment is covered by the aeration system. The correct design of the aeration system is the basis for a good operation and the operational costs. As the energy costs are the main cost value of an aeration system, a real comparison of different systems must concern both the operation and the invest costs of the whole life cycle.

With Aqua Aero you are able to design the aeration system with blowers, mixers and pipelines for different chamber geometries. You have the choice of membrane aerators (as tubular-, disc- or plate aerators) and surface aerators (in the next version of Aqua Aero). From a database you can choose fitting aggregates for the single calculation steps. As important efficiency parameter the oxygen efficiency is provided. With the calculation of investment, reinvestment and operating costs the economical calculation of Aqua Aero covers the whole life cycle of the aeration. And you get a detailed documentation of the calculations and true scaled drawings of the equipment.

And an important feature added to Aqua Aero for optimizing the construction: now you can calculate more than just one project and compare them objectively by one value.

Shortly combined: Aqua Aero is a powerfull tool for economical and procedual design of aeration systems for wastewater treatment plants.
   Читать статью дальше  (комментариев - 8)

BITControl Aqua Designer v8.0.9 Software
BITControl Aqua Designer v8.0.9

BITControl Aqua Designer v8.0.9

Aqua Designer is a software tool for the design of the several processes of a wastewater treatment plant, from mechanical treatment via biology up to sludge treatment. Regarding the basis of calculation, the process and the construction all common process variations are to choice. Planning is supported by many auxiliary functions. As result Aqua Designer supplies extensive documents ready to be printed for official documents, including buildings, machines, operating costs and true scaled drawings. Aqua Designer is used world-wide for the planning of treatment plants.

More info.
   Читать статью дальше  (комментариев - 12)

Autodesk AutoCAD 2018 Software / Sport
Autodesk AutoCAD 2018 eng+rus x86+x64

Autodesk AutoCAD 2018

Autodesk AutoCAD является мировым лидером среди решений для 2D- и 3D-проектирования. Будучи более наглядным, 3D моделирование позволяет ускорить проектные работы и выпуск документации, совместно использовать модели и развивать новые идеи. Для AutoCAD доступны тысячи надстроек, что позволяет удовлетворить потребности самого широкого круга клиентов.

   Читать статью дальше  (комментариев - 45)

WeBBusterZ S&THex v3.1 & Physical Properties Estimation DB v 3.6.1 Software
WeBBusterZ Engineering Software
Shell and Tube Heat Exchange Design v3.1.0.0
Physical Properties Estimation Database v3.6.1

WeBBusterZ S&THex v3.1 & Physical Properties Estimation DB v 3.6.1

Shell and Tube Heat Exchanger Design (S&THex) is a software tool that is made to demonstrate the chemical design & rating calculations. Unlike other tools, ensures that the calculations are performed step by step to help in understanding the design calculations.

Physical Properties Estimation Database has over 1400 components and can estimate physical properties for pure components based on correlations. All you provide is Temperature and the software will do the rest. The software doesn’t take into account any pressure during the estimation. If the temperature is not within the correlation range for a particular property, the software will warn against the estimation error. All mixture estimations are based on general equations for mixture estimates. The software will use the pure properties of components involved along with general equations to estimate the mixture properties.
   Читать статью дальше  (комментариев - 16)

#ДимонОтветит News

Много спрашивают: с плакатом идти стрёмно, что делать?

Отвечаю: старые кроссовки через плечо повесьте. Чем не плакат?
Added 26/03/17:
Москва. Пушкинская площадь. Жаль, что никто не пришел (по данным МВД). Я был один.















   Читать статью дальше  (комментариев - 48)

Southbeach Modeller v3.1.0.0 Software
Southbeach Modeller v3.1.0.0

Southbeach Modeller v3.1.0.0

Founded in 2009, Southbeach Solutions Ltd is an independent British software vendor (ISV). We provide Southbeach Modeller, a visual and analytical tool for creativity, design and innovation.

Southbeach Modeller has been benchmarked against diagramming software, presentation packages and other structured modelling tools. It is typically between ten to thirty times faster to develop a model in Southbeach than in other products. This productivity is critical in a workshop setting. Keep up with attendees, without frustrating them. Southbeach is an 'additive' modelling approach. The constructive yet differing views and perspectives of the team can be captured, and integrated, without having to go 'back to the drawing board'. There is no need to continually re-work the model. Build on past work. Reuse building blocks from previous models, without the need to open any file. Drill down to sub-models or to individual elements. Drag what you need to the canvas.

More info.
   Читать статью дальше  (комментариев - 5)

Honeywell Socrates v8.0 Software
Honeywell Socrates v8.0 repack

Honeywell Socrates v8.0

Socrates is a comprehensive material selection system for corrosive oil and gas applications, enabling users to make consistent, optimized material selection choices based on real engineering corrosion data and rigorous materials engineering guidelines.

   Читать статью дальше  (комментариев - 8)

Red Hen isWhere v3.1.0.14 Software
Red Hen isWhere v3.1.0.14

Red Hen isWhere v3.1.0.14

isWhere is Red Hen’s answer to mapping your GPS enabled data collection of photos, video or audio notes onto Google Earth. It will represent  your captured geotagged footage and metadata onto a 3D map. There are two components to the mapping of your geo-referenced media using isWhere:

  • Track - A track log of the route traversed is generated on Google Earth. Each point on the track is clickable. Selecting a point displays important details regarding GPS and other sensor information at the time of the logging. There is also a synchronized moving cursor on the mapped track that indicates the exact GPS location of the camera during video playback.
  • Media playback - A camera’s perspective of the surrounding area recorded at the exact GPS location of the moving cursor can be viewed using the standard Windows Media Player. Additionally, if installed separately, video playback for isWhere can be viewed in the free VideoLan Media Player.
The moving cursor is synchronized with the video at all times. IsWhere makes it convenient to view the exact GPS location on the track and the captured media of that location all on one screen.

More info, tutorial videos, manuals.
   Читать статью дальше  (комментариев - 9)

InGeomatics Mr.CAD Stand Alone 3 v3.0 r.104 Software
InGeomatics Mr.CAD Stand Alone 3 v3.0 r.104

InGeomatics Mr.CAD Stand Alone 3 v3.0 r.104

Mr.CAD Stand Alone is a totally independent solution for Civil engineers and Land surveyors. Provides all the necessary tools to create: plot subdivision, topographic plans, leveling plans, and volume computations. Includes utilities for points management, import & export to data collectors, and many more.

More info.
   Читать статью дальше  (комментариев - 22)


Что ищем:
Расширенный поиск

Adobe, Agnitum, Applied Flow, Aquaveo, Ascon, AspenTech, Autodesk, Bentley, Bricsys, Carlson, CSI, CSoft, Dassault, Delcam, ESRI, Gemcom, GeoStru, Global Mapper, Golden Software, Graitec, Graphisoft, IES, Intergraph, LAVteam, Leica, MicroSurvey, nanoSoft, Nemetschek, Progesoft, PROKON, PTC, Rarlab, Schlumberger, Siemens, Tekla, Transoft, Trimble, VariCAD, Wiley, ZwSoft

Показать все теги

«    Март 2017    »



If you enjoy our work,
please support us.


yandex money


LAVteam: 1999-2019