ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

Программный комплекс ETABS для расчета конструкций зданий - Часть 1 Bookware
 
Вебинар "Программный комплекс ETABS для расчета конструкций зданий" - Часть 1
Вебинар посвящен возможностям расчетного комплекса ETABS, сертифицированного на соответствие российским нормам проектирования. На вебинаре рассмотрен процесс создание модели, назначения статических нагрузок и динамических воздействий на конструкцию, настройка параметров расчета и вывод результатов расчета.
    Читать статью дальше  (комментариев - 7)


CSI Bridge 2017 Advanced with Rating v19.0.0 build 1294 Software
 
CSI Bridge 2017 Advanced with Rating v19.0.0 build 1294 x86+x64

CSI Bridge 2017 Advanced with Rating v19.0.0 build 1294

Modeling, analysis and design of bridge structures have been integrated into CSI Bridge to create the ultimate in computerized engineering tools. The ease with which all of these tasks can be accomplished makes CSI Bridge the most versatile and productive software program available on the market today. 


Using CSI Bridge, engineers can easily define complex bridge geometries, boundary conditions and load cases. The bridge models are defined parametrically, using terms that are familiar to bridge engineers such as layout lines, spans, bearings, abutments, bents, hinges and post-tensioning. The software creates spine, shell or solid object models that update automatically as the bridge definition parameters are changed. 

CSI Bridge design allows for quick and easy design and retrofitting of steel and concrete bridges. The parametric modeler allows the user to build simple or complex bridge models and to make changes efficiently while maintaining total control over the design process. Lanes and vehicles can be defined quickly and include width effects. Simple and practical Gantt charts are available to simulate modeling of construction sequences and scheduling. 

CSI Bridge includes an easy to follow wizard that outlines the steps necessary to create a bridge model. 

Completely integrated within the CSI Bridge design package is the power of the SAPFire analysis engine, including staged construction, creep and shrinkage analysis, cable tensioning to target forces, camber and shape finding, geometric nonlinearity (P-delta and large displacements), material nonlinearity (superstructure, bearings, substructure and soil supports), buckling and static and dynamic analysis. All of these apply to a single comprehensive model. In addition, AASHTO LRFD design is included with automated load combinations, superstructure design and the latest seismic design.

    Читать статью дальше  (комментариев - 25)


CSI SAP2000 v19.0.0 build 1294 Software
 
CSI SAP2000 v19.0.0 build 1294 x86+x64

CSI SAP2000 v19.0.0 build 1294

SAP2000 следует принципам, основными чертами которых являются современный, интуитивно понятный и универсальный пользовательский интерфейс, основанный на уникальном расчетном ядре и инструментах проектирования конструкций для инженеров, разрабатывающих объекты транспортной инфраструктуры, промышленные и гражданские здания, спортивные сооружения и другие объекты.


Начиная с трехмерной объектно-ориентированной рабочей среды моделирования и до широчайшего спектра опций расчета и проектирования конструкций, комплексно интегрированных в один мощный пользовательский интерфейс, SAP2000 – это наиболее интегрированный, производительный и практичный расчетный комплекс общего назначения, существующий на сегодняшнем рынке. Интуитивно понятный интерфейс позволяет Вам создавать модели конструкций в кратчайшие сроки без долгого процесса обучения. Сегодня Вы можете использовать SAP2000 для всех Ваших задач по расчету и проектированию, в том числе и для небольших повседневных задач.

Комплексные модели могут быть созданы и разбиты на конечные элементы с использованием встроенных шаблонов. Интегрированные инструменты проектирования конструкций способны автоматически сгенерировать ветровые, волновые, нагрузки от транспорта и сейсмические нагрузки на модель, а также выполнить полную автоматическую проверку стальных и железобетонных элементов согласно нормам проектирования различных стран.

News in release 19.0.0 are here and there.
    Читать статью дальше  (комментариев - 28)


CSI Bridge 2016 Advanced with Rating v18.2.0 build 1269 Software
 
CSI Bridge 2016 Advanced with Rating v18.2.0 build 1269 x86+x64

CSI Bridge 2016 Advanced with Rating v18.2.0 build 1269

Modeling, analysis and design of bridge structures have been integrated into CSI Bridge to create the ultimate in computerized engineering tools. The ease with which all of these tasks can be accomplished makes CSI Bridge the most versatile and productive software program available on the market today. 

Using CSI Bridge, engineers can easily define complex bridge geometries, boundary conditions and load cases. The bridge models are defined parametrically, using terms that are familiar to bridge engineers such as layout lines, spans, bearings, abutments, bents, hinges and post-tensioning. The software creates spine, shell or solid object models that update automatically as the bridge definition parameters are changed. 

CSI Bridge design allows for quick and easy design and retrofitting of steel and concrete bridges. The parametric modeler allows the user to build simple or complex bridge models and to make changes efficiently while maintaining total control over the design process. Lanes and vehicles can be defined quickly and include width effects. Simple and practical Gantt charts are available to simulate modeling of construction sequences and scheduling. 

CSI Bridge includes an easy to follow wizard that outlines the steps necessary to create a bridge model. 

Completely integrated within the CSI Bridge design package is the power of the SAPFire analysis engine, including staged construction, creep and shrinkage analysis, cable tensioning to target forces, camber and shape finding, geometric nonlinearity (P-delta and large displacements), material nonlinearity (superstructure, bearings, substructure and soil supports), buckling and static and dynamic analysis. All of these apply to a single comprehensive model. In addition, AASHTO LRFD design is included with automated load combinations, superstructure design and the latest seismic design.

    Читать статью дальше  (комментариев - 20)


CSI ETABS 2016 v16.0.0 build 1488 Software
 
CSI ETABS 2016 v16.0.0 build 1488 x86+x64

CSI ETABS 2016 v16.0.0 build 1488

The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. 


From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. 

ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive.

CSi ETABS 16.0.0 Release Notes.
    Читать статью дальше  (комментариев - 83)


CSI SAP2000 v18.2.0 build 1267 Software
 
CSI SAP2000 v18.2.0 build 1267 x86+x64

CSI SAP2000 v18.2.0 build 1267

CSI SAP2000 - cистема трехмерного статического и динамического анализа методом конечного элемента и проектирование сооружений. CSI SAP2000 следует в той же самой традиции, показывающей очень сложный, интуитивный и универсальный пользовательский интерфейс, приведенный в действие непревзойденным механизмом анализа и средствами проектирования для инженеров, работающих над транспортировкой, индустриальными, общественными работами, спортивными состязаниями, и другими средствами. От основанной графической среды моделирования трехмерного объекта, к большому разнообразию опций анализа и проектирования, полностью интегрированных через один пользовательский интерфейс, CSI SAP2000, оказался наиболее интегрированной, производительной и практической универсальной структурной программой на рынке сегодня.


News in release 18.2.0.
Also should note that Russian response spectrum function added and Russian material property library enhanced.
    Читать статью дальше  (комментариев - 36)


CSI PERFORM-3D v5.0.1 Software
 
CSI PERFORM-3D v5.0.1

CSI PERFORM-3D v5.0.1

CSI PERFORM-3D was designed for nonlinear analysis and performance assessment for 3D structures.

Displacement Based Design
  • Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis.
  • Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational.
  • Strength-based design considers inelastic behavior only implicitly.
  • Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis.
  • Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength.
  • PERFORM-3D allows you to use displacement-based design.
Implementation of ASCE 41
  • Procedures for displacement-based design using inelastic analysis are specified in ASCE 41, ”Seismic Rehabilitation of Existing Buildings”.
  • ASCE 41 applies to the retrofit of existing buildings, but the procedures can be applied to the design of new buildings.
  • PERFORM-3D implements the procedures in ASCE 41.
  • However, PERFORM-3D is a general tool for implementing displacement-based design. It is not limited to ASCE 41.
Capacity Design
  • The response of a structure to earthquake ground motion, whether elastic or inelastic, is highly uncertain.
  • Capacity design is a rational way to improve the response of a structure in a strong earthquake, by deliberately controlling its behavior.
  • Capacity design controls the inelastic behavior of a structure, by allowing inelastic behavior only in locations chosen by the designer. In these locations the structural components are designed to be ductile. The rest of the structure remains essentially elastic, and can be less ductile.
  • Controlling the behavior in this way improves reliability, reduces the amount of damage, and can reduce construction costs.
  • PERFORM-3D allows you to apply capacity design principles.
What PERFORM-3D is NOT
  • - PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis.
  • If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design.
  • However, PERFORM-3D is not intended for ”design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave.  
  • PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.
    Читать статью дальше  (комментариев - 16)


CSI CSiCOL v9.0.1 Software
 
CSI CSiCOL v9.0.1

CSI CSiCOL v9.0.1

CSI CSiCOL - программа для расчета колонн.

CSI CSiCOL is a comprehensive software package used for the analysis and design of columns. The design of columns of any concrete, reinforced concrete, or composite cross-section can be carried out by the program. CSI CSiCOL provides a 'Quick Design Wizard' tool that guides the users step-by-step, through the whole process of column design. This makes the design process simple, organized and efficient. The design can be carried out in accordance with ACI-318-02, ACI-318-99, BS8110 or CSA A-23.3-94 codes.

Подробнее тут.
    Читать статью дальше  (комментариев - 30)


CSI SAFE v14.2.0.1069 Software
 
CSI SAFE v14.2.0.1069
with new extended license generator up to July, 2017

CSI SAFE v14.2.0.1069

CSI SAFE - програмный продукт, предназначенный для автоматизации расчетов и деталировки железобетонных плит и фундаментов от простых до сложных. Программа выполняет расчет и деталировку плит и плит по грунту произвольной формы, различной толщины, с капителями, проемами, балками по периметру. Фундамент фундамент можно смоделировать из плиты, ленточного и отдельно стоящего. Расчет выполняется МКЭ. Фундаменты расчитываются как толстая пластинка на упругом основании. Программа выполняет схему армирования с учетом расчета на продавливание плиты от колонны. Есть возможность также выполнить проверку по второй группе предельный состояний. Удобная опция экспорта из ETABS (другого программного продукта этой компании) для дальнейшего расчета.
    Читать статью дальше  (комментариев - 36)


CSI ETABS 2015 v15.2.2.1364 Software
 
CSI ETABS 2015 v15.2.2.1364 x86+x64
with new extended license generator up to July, 2017

CSI ETABS 2015 v15.2.2.1364

The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. 

From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. 

ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive.

CSi ETABS 15.2.2 Release Notes.
    Читать статью дальше  (комментариев - 44)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Март 2024    »
ПнВтСрЧтПтСбВс
 123
45678910
11121314151617
18192021222324
25262728293031
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023