ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

CSI PERFORM-3D v5.0.1 Software
 
CSI PERFORM-3D v5.0.1

CSI PERFORM-3D v5.0.1

CSI PERFORM-3D was designed for nonlinear analysis and performance assessment for 3D structures.

Displacement Based Design
  • Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis.
  • Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational.
  • Strength-based design considers inelastic behavior only implicitly.
  • Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis.
  • Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength.
  • PERFORM-3D allows you to use displacement-based design.
Implementation of ASCE 41
  • Procedures for displacement-based design using inelastic analysis are specified in ASCE 41, ”Seismic Rehabilitation of Existing Buildings”.
  • ASCE 41 applies to the retrofit of existing buildings, but the procedures can be applied to the design of new buildings.
  • PERFORM-3D implements the procedures in ASCE 41.
  • However, PERFORM-3D is a general tool for implementing displacement-based design. It is not limited to ASCE 41.
Capacity Design
  • The response of a structure to earthquake ground motion, whether elastic or inelastic, is highly uncertain.
  • Capacity design is a rational way to improve the response of a structure in a strong earthquake, by deliberately controlling its behavior.
  • Capacity design controls the inelastic behavior of a structure, by allowing inelastic behavior only in locations chosen by the designer. In these locations the structural components are designed to be ductile. The rest of the structure remains essentially elastic, and can be less ductile.
  • Controlling the behavior in this way improves reliability, reduces the amount of damage, and can reduce construction costs.
  • PERFORM-3D allows you to apply capacity design principles.
What PERFORM-3D is NOT
  • - PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis.
  • If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design.
  • However, PERFORM-3D is not intended for ”design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave.  
  • PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.
    Читать статью дальше  (комментариев - 16)


CSI CSiCOL v9.0.1 Software
 
CSI CSiCOL v9.0.1

CSI CSiCOL v9.0.1

CSI CSiCOL - программа для расчета колонн.

CSI CSiCOL is a comprehensive software package used for the analysis and design of columns. The design of columns of any concrete, reinforced concrete, or composite cross-section can be carried out by the program. CSI CSiCOL provides a 'Quick Design Wizard' tool that guides the users step-by-step, through the whole process of column design. This makes the design process simple, organized and efficient. The design can be carried out in accordance with ACI-318-02, ACI-318-99, BS8110 or CSA A-23.3-94 codes.

Подробнее тут.
    Читать статью дальше  (комментариев - 30)


ASDIP Structural Retain v3.4.6 Software
 
ASDIP Structural Retain v3.4.6

ASDIP Structural Retain v3.4.6

ASDIP Retain is a suite of modules specifically dedicated to the design of retaining walls, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Retain includes the design of the following two types of retaining walls:
  • Cantilever Retaining Walls: Design of a retaining wall supported only at the base under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7.
  • Restrained Retaining Walls: Design of a retaining wall supported at the base and laterally restrained at the top, also known as a basement wall, under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7.
    Читать статью дальше  (комментариев - 29)


ASDIP Structural Steel v3.8.6 Software
 
ASDIP Structural Steel v3.8.6

ASDIP Structural Steel v3.8.6

ASDIP Steel is a suite of modules specifically dedicated to the design of structural steel members, based on the latest AISC specifications (AISC 360), that greatly simplifies the time-consuming calculations in any structural engineering office.


More info.
    Читать статью дальше  (комментариев - 21)


Суки ахуели Software
 
Блядь, он просто негодяй и пидор. Потомственный, сука, юрист. Привокзальная урна. Просто умалишенный.

Вообще, все это обнаружилось в ходе расследования о царь-квартире Шувалова, но выделенно в отдельный сюжет, так как вице-премьер правительства России, извините меня, охренел. Охренел фантастически.

Думаю, что вы и сами не сможете использовать иного слова, когда дочитаете пост и посмотрите короткое видео.

Если раньше, со всеми этими замками и квартирами в Лондоне, истории со скупкой этажа в высотке на Котельнической, квартир на Косыгина, Роллс-Ройса, казалось, что он просто наглый жулик и выпендрежник, то сейчас я склоняюсь к тому, что он скорее сумасшедший. Учитывая его монологи про «надо терпеть любые лишения и отказываться от электричества», я констатирую серьезное расстройство психики вице-премьера.

Он просто чокнулся от свалившихся на него денег и власти. Буквально как в песне «сходят с ума, потому что им нечего больше хотеть».
 
Они там все спятили в Кремле. Реально спятили. Разворовали нефтедоллары, льющиеся с неба (напомню, за время правления Путина от продажи нефти и газа Россия получила 3 триллиона). Потом легализовали украденное через «бизнес». Потом поверили сами, что они это заработали, а не украли. Поверили, что они достойны этих богатств. Купили замки и поместья. Создали фамильные гербы (у Шувалова, например, есть герб на котором совы)

Вообразили себя аристократией. Ну и так потихоньку реально спятили. Сумасшедший — он же не обязательно сидит и слюни пускает. Его расстройство может и в том заключаться, что он катает собак на самолёте.
 
Комменты его жены:
Подробнее тут.
 
Я вообще не могу представить, где такое может быть. Ни в одной стране, даже самой коррумпированной, такого происходить просто не может. Есть, конечно, всякие шейхи, покупающие золотые ламборгини, ну так у шейхов каждому гражданину при рождении выделяют деньги на жизнь и учёбу в любом университете мира. Население маленькое, а нефти много.

У нас же за чертой бедности живёт 22,9 миллионов человек. То есть 20% населения практически нищие, а этот пидор тратит на полёты собак 40 миллионов рублей в год.

И не надо мне говорить «Шувалов богатый, может себе позволить». Даже если бы его деньги были честными (а это не так), невозможно, чтобы чиновник, первый заместитель председателя правительства, тратил 170 миллионов рублей в год на полёты на прайвет-джете, из которых 40 миллионов — перевозка собак.

Это ненормально, это аморально, это безумно. Много можно эпитетов подобрать. Для обычного человека ненормально, а для чиновника — ну вообще невозможно представить.

И ведь именно Шувалов из всех высокопоставленных чиновников чаще всего призывает россиян к самоограничениям. Помните это «меньше есть, меньше электричества».

Да, давайте меньше есть, потому что твой собаке бизнес-класса недостаточно.

Сейчас предвыборная кампания, «Единая Россия» снова нам будет рассказывать, как они радеют за народ и какое у нас социальное государство. Вот пусть вся страна тычет им в лицо Шуваловым, его недвижимостью, его собаками и его образом жизни. Пусть каждый кандидат в депутаты от любой партии ответит: может ли чиновник жить вот так?

Не забывайте, что во главе списка ЕР идёт Медведев, а Шувалов его первый заместитель и по факту он и руководит правительством, пока сам Медведев выполняет неизбежную представительскую функцию.
    Читать статью дальше  (комментариев - 30)


ASDIP Structural Foundation v3.0.5 Software
 
ASDIP Structural Foundation v3.0.5

ASDIP Structural Foundation v3.0.5

ASDIP Foundation is a suite of modules specifically dedicated to the design of concrete footings, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Foundation includes the design of the following types of concrete footings:
  • Spread Footings: Design of a concrete spread footing under the action of vertical load, horizontal load and biaxial bending. This module designs the footing per the load combinations of the ASCE 7.
  • Strap Footings: Design of a concrete strap footing under the action of vertical loads, horizontal loads and bending moments. This module designs the two footings and the strap beam per the load combinations of the ASCE 7.
  • Combined Footings: Design of a concrete combined footing under the action of vertical loads, horizontal loads and bending moments. This module designs the combined footing per the load combinations of the ASCE 7.
    Читать статью дальше  (комментариев - 20)


CSI SAFE v14.2.0.1069 Software
 
CSI SAFE v14.2.0.1069
with new extended license generator up to July, 2017

CSI SAFE v14.2.0.1069

CSI SAFE - програмный продукт, предназначенный для автоматизации расчетов и деталировки железобетонных плит и фундаментов от простых до сложных. Программа выполняет расчет и деталировку плит и плит по грунту произвольной формы, различной толщины, с капителями, проемами, балками по периметру. Фундамент фундамент можно смоделировать из плиты, ленточного и отдельно стоящего. Расчет выполняется МКЭ. Фундаменты расчитываются как толстая пластинка на упругом основании. Программа выполняет схему армирования с учетом расчета на продавливание плиты от колонны. Есть возможность также выполнить проверку по второй группе предельный состояний. Удобная опция экспорта из ETABS (другого программного продукта этой компании) для дальнейшего расчета.
    Читать статью дальше  (комментариев - 36)


ASDIP Structural Concrete v3.2.2 Software
 
ASDIP Structural Concrete v3.2.2

ASDIP Structural Concrete v3.2.2

ASDIP Concrete is a suite of modules specifically dedicated to the design of concrete members such as beams, columns and walls, based on the latest ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Concrete includes the design of the following types of concrete elements:
  • Concrete Columns: design of a concrete column under the action of axial loads and bending moments. This module calculates the magnified moments for slenderness of ASCE 7 load combinations, and generates the column strength interaction diagram.
  • Concrete Beams: design of a concrete muti-span continuous beam under the action of uniform and concentrated loads. This module accurately calculate the bending and shear strength for different types of beams. Load combinations per ASCE 7.
  • Bearing Walls: design of a concrete wall under the action of vertical and out-of-plane lateral loads. This module calculates the magnified moments for slenderness of ASCE 7 load combinations, and generates the wall strength interaction diagram.
ASDIP Concrete is an integrated, interactive system that combines the flexibility of a fill-in-the-blanks format with the power of Windows Forms to effortlessly develop either an optimal design or a quick investigation.

Using a screen with tabbed pages, ASDIP Concrete allows you enter your data directly onto the forms and see the result immediately. This way you are always in control of the design process, since what you see is really what you get. In addition, the detailed results and the graphics are always available for you to follow by the touch of a tab.
    Читать статью дальше  (комментариев - 17)


IRIS Readiris Corporate v15.1.0 build 7155 Software
 
IRIS Readiris Corporate v15.1.0 build 7155

IRIS Readiris Corporate v15.1.0 build 7155

Readiris - идеальное решение для тех, кому нужно быстро и точно переводить бумажные документы в форматируемый текст с максимально полным сохранением исходного оформления. Благодаря уникальной технологии распознавания Readiris, программа с 99% точностью распознает тексты и максимально полно сохраняет исходное оформление документа. Readiris распознает документы на 107 языках, включая русский, белорусский, казахский, украинский. Readiris легко и быстро экспортирует результаты распознавания в популярные офисные приложения, включая Word, Excel и многие другие. Распознанный текст можно сохранить в различные форматы: PDF, HTML, Microsoft Word, DOC, RTF, CSV и TXT.

Readiris is a powerful OCR software designed to convert all your paper documents, images or PDF into editable and searchable digital text (Word, Excel, PDF…) in just a click.

Readiris Pro can scan 50 pages at a time. It is not possible to scan or open more than 50 pages inside a single Readiris project. Readiris Corporate can open an unlimited number of pages inside a single project.
    Читать статью дальше  (комментариев - 7)


Black Mint Concise Beam v4.59x Software
 
Black Mint Concise Beam v4.59x

 

Black Mint Concise Beam v4.59x

Concise Beam is a complex and yet easy to use CAD application that enables users to design and analyze precast concrete beams. The application performs its tasks in accordance to ACI 318, CSAA23.3 and AS3600 codes. Users can model cross-sections to meet their demands as well as create prismatic variations over the length of the beam. Using Concise Beam you can choose from multiple beam layouts such as simply supported beams, cantilevers, load distribution and cast-in-place pours.

    Читать статью дальше  (комментариев - 7)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Июль 2016    »
ПнВтСрЧтПтСбВс
 123
45678910
11121314151617
18192021222324
25262728293031
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023